Hi Scott,
I'm reviewing this issue with out PC software engineer. He already
knows what the problem is, and we'll be releasing an updated K3utility
(and K3 firmware, if required) as soon as possible.
73,
Wayne
N6KR
On Oct 1, 2010, at 7:35 AM, Scott Ellington wrote:
> Has this been resolved
Has this been resolved?
I had a similar problem with the current utility and firmware as of 26 Sept. I
had previously calibrated the S-meter to the XG2, then a few day later it was
town from S9 to S6. I'm not aware of anything I might have done in the
meantime to affect calibration. I recali
Stephen
I'm also having problems doing an RF Gain Cal using the latest K3
Utility (and a few other recent versions).
Various error codes are displayed and the Rx sensitivity is well down
after I cycle the Power switch off and back on again. The S meter only
reads about S5 and the MDS drops fro
All of a sudden, I'm having trouble with the K3's receiver following RF gain
calibration and S meter setting. The RF gain calibration using the utility
leaves the receiver with S9 at -73dBm (using ZG-2) but when I turn off and
then on the K3 the S meter drops to S7 and the RF gain control, althoug
4 matches
Mail list logo