of receive, I can't get a straight
answer.
73
Stewart G3RXQ
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Stewart
Baker
Sent: Monday, April 28, 2008 1:30 PM
To: Elecraft Reflector
Subject: [Elecraft] K3 - Dead RX after TX
Hi All,
I have been
Hi All,
I have been experiencing a strange problem on my K3 where the
receiver is sometimes 'dead' after transmit. This seems to be tied
in with the MCU control of the DSP.
To prove that this is either unique or not to my unit, I would be
grateful if fellow K3 owners could try this quick test.
K3 newbie here. Tried to test using your sequence, but stopped at the
SAV ALT1 command. My (USA Version) K3 does not have such button(s)
or entries in MAIN or CONFIG, and the Operators manual does not even
have an entry for that/those commands. Help.
Jerry W4UK
At 01:30 PM 4/28/2008, you
It would be extremely helpful for those of us who yet received our K3s
that any of these concrete problem-repro cases include:
SN
Firmware version
And hardware versions of the peripherals used.
Does the Config capabilities of the K3's firmware loader provide a way to
dump the comphrensive I
Hi Jerry:
Check the firmware Release Notes for, I think, MCU v1.75. Tells you all
about it there.
73,Ken K3IU
~
Jerry Flanders wrote:
K3 newbie here. Tried to test using your sequence, but stopped at the
SAV ALT1 command. My (USA Version) K3 does not have such button(s) or
Jeff, W7BRS wrote:
Does the Config capabilities of the K3's firmware loader provide a way to
dump the comphrensive I am this version of K3 including SN/Firmware #,
and hardware version of the peripheral? Are peripherals like the ATU or RX
come with their own SN?
The output file from Save
6 matches
Mail list logo
