Jim (KG0P),
These error displays sound similar to ones I get from time to time. Remove the
front panel and carefully clean all the connector pins. Then apply some
connector lubrication before replacing the panel; we have some stuff called
'Contralube' over here. An added benefit is that you no
These are intermittent. They appear at power on just before the welcome
message. At first I thought it was only ERR BP1 but since I have realized
that pressing the disp button also shows the others if I can do it fast
enough to read them before they go away and into the welcome message. They
Jim,
It would appear that your K3 options are not being recognized at startup
- that would be some problem with the AUXBUS responses when the options
are polled.
If you have a saved configuration file, I would suggest doing an EEINIT
(see Parameter Initialization in the manual). After the
Jim,
These error messages point to an SPI bus communication problem, which in turn
is most likely due to an intermittent connection between the front panel and RF
board.
Remove the screws from the top and bottom of the front panel assembly, back the
assembly out about 1/8th to 1/4, then push
4 matches
Mail list logo