I have found the following procedure gives me time and support to do this easily: 1) Remove right side panel (probably off already if you're working on the front). 2) Remove the rear mounting screw on the 2-D fastener, front right of RF board 3) Lay the K3 on its right side, on a smooth anti-static surface. 4) Lay the front panel on its right edge and cozy it up to the K3. 5) Be sure the front dress panel comes inside the left side panel. 6) Be sure the front dress panel overlaps the 2-D connectors correctly. 7) Check connector alignment and mate the front panel slowly, while everything is on its side.
Since the table carries all the weight, your toper's hands will not have a chance to louse things up! As always, YMMV. Works for me. _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
