Hi all,
problem described below is now fixed. Tnx to Wayne for the support by
email! I loaded the newest beta without any problems. Did some tests
yesterday evening. VOX works again. Everything I use seems to be fine. I
guess I had some problems during the update which wasn't successful. I
couldn't reproduce it. So let's go on playing and work some new band
points ;-)
73 to all & tnx for all answers!
Frank, DD7ZT
Frank Lammel schrieb:
I loaded rev 1.94 yesterday evening. My main problem is the not working
VOX in 1.88. However it was more worse than with 1.88! Once set to VOX I
couldn't set it back to PTT. It switched the whole time to TX, no matter
what MIC gain settings I choosed. (Oh, I didn't tried the VOX gain, it
is still at 35, maybe this would help?!). Well, also the TRX seemed to
had some kind of other problems. All LEDs swichted to on and off again,
the display get's dark and some relays clicked. Then it came back. This
happened several times.
Does anybody had similar problems? Or did I make another mistake?
73!
Frank, DD7ZT
wayne burdick schrieb:
Thanks to your input on the last firmware release (1.88), we've made a
number of important improvements.
For the first time, we're posting new firmware as "beta." Upgrading is
optional: if you want to minimize your risk, you might want to wait
until we've blessed it as a normal production firmware release. (Or
until all your friends have it and you're a little jealous.)
We'd love to have as many thrill-seekers as possible take the plunge
and load the new firmware now. We think it's greatly improved, and it
will certainly clear up many of the issues noted over the past week.
Even though we're headed to Dayton in a couple of days, we'll be
monitoring closely for any additional issues.
For release notes and instructions on how to load beta firmware,
please see:
http://www.elecraft.com/K3/k3_software.htm
The instructions (linked from within the release notes) explain how to
create a separate folder for the beta revision. This will allow you to
easily revert to an older revision if you find it necessary. Hopefully
not!
For your convenience I've also provide the release notes below.
73,
Wayne
N6KR
* * *
MCU 1.94 / DSP 1.73, 5-12-08
* VOX: Increased sensitivity. Typical VOX GN settings now ~30-50.
* VOICE MONITOR: Eliminated “scratchy” artifacts with compression
set to high levels.
* FM DEVIATION ADJUSTABLE: Use CONFIG:FM DEV menu entry (default:
5.0 kHz).
* Flash memory driver improved to prevent occasional receive
dropouts, “ERR PL1”, and
“FPF LOAD PENDING” messages.
* XMIT SWITCH IN MENU: Tapping XMIT while in menu correctly
starts/ends transmit.
* PASSBAND SHIFT BELOW “0.00” CORRECTED: The SHIFT control no longer
allows
continued rotation below 0.00. (This was occurring only with
sidetone pitch < 500 Hz.)
* SQUELCH/RF GAIN CONTROL CHANGES: By default, the RF/SQL concentric
pots
control main and subreceiver RF gain, and squelch is controlled by
two CONFIG menu
entries (SQ MAIN and SQ SUB). But setting SQ MAIN to "=SUB POT"
assigns
SUB RF/SQL pot to both main and sub squelch, and in this case, the
main RF/SQL
pot controls both main and sub RF gain. Setting SQ MAIN back to a
numeric value
restores the default assignments. Note: Squelch applies only to FM
mode at present.
---
http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft Help:
http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
