craft
switch but a similar one requires a minimum current of 10uA. This should be
checked more rigorously, but it might indicate a potential problem.
David
G3UNA
Subject: Re: [Elecraft] K3 Check Your Buttons
Paul,
I am very surprised that this has not come up before!
My K3 is #570 and it ha
Paul,
I am very surprised that this has not come up before!
My K3 is #570 and it has had 4 front panel boards (a couple for what I
called flaky or just bad switches and the rest for other reasons) and
the same problem you describe is still there. The latest one is the
best, but I still get som
Hi Paul,
I have K3 #509. I tested my keyboard and I also found some flickering
on some buttons. I never had any issues with operation. It might be
interest to compare which buttons are flickering.
During the Scn Adc test, the following key's second value would flicker:
Button 1st value
I own K3 #757 and recently noticed some of the front panel buttons were not
working. They either did not work at all or gave strange results. I contacted
support, and they advised me to use the Config Menu SW Test to check all
buttons.
If you have not tried it, go to Config Menu, rotate VFO B
4 matches
Mail list logo