I'm working on this and other K3 rev 3.99 issues. I hope to have a new
release soon.
73,
Wayne
N6KR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Ele
So I am not going nuts. Same problem here.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John, KD8K
Sent: Monday, May 31, 2010 4:38 PM
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Firmware V3.99
I
On Mon, 31 May 2010 16:38:11 -0400, "John, KD8K"
wrote:
Yes, the QSK is much improved.
Good work guys!
[snip]
>By the way, I really like the new QSK+ mode. It may be the best QSK I
>have heard on any rig. Thanks!
>
>73, John KD8K
[snip]
>> From: "John, KD8K"
>> Cc:
>> Sent: Monday, May 31, 2010 4:38 PM
>> Subject: Re: [Elecraft] K3 Firmware V3.99
>>
>>
>>
>>> I have the same thing occurring here with 3.99. When working split, as
>>> soon as I transmit, sub RX r
3.99 Alpha. Something similar. Frequency is 7012 but don't think that matters.
Set to CW. Turn on SUB. Double tap A>B. SPLIT. BSET. MODE to SSB.
Clear BSET. TUNE. Clear TUNE. Sub RX now has some very strange
audio as if went to CW filter but shift is way high. Hitting BSET to
view SUB s
T will be nice to have back.
>
Where could I get Firmware V3.99 just to test it ?
> Steve
> N4LQ
>
Best 73.
CT1DRB
David Quental
> - Original Message -
> From: "John, KD8K"
> Cc:
> Sent: Monday, May 31, 2010 4:38 PM
> Subject: Re: [Elecraf
Steve
N4LQ
- Original Message -
From: "John, KD8K"
Cc:
Sent: Monday, May 31, 2010 4:38 PM
Subject: Re: [Elecraft] K3 Firmware V3.99
>I have the same thing occurring here with 3.99. When working split, as
> soon as I transmit, sub RX reception quits. (just a slight noise i
I have the same thing occurring here with 3.99. When working split, as
soon as I transmit, sub RX reception quits. (just a slight noise in
background on the sub rx, like a receiver that has no antenna
connected). This was on CW. Both the sub and the main receiver was set
to the same mode (CW).
I can replicate this (with 3.99alpha) but only if I have VFO A in CW mode
then SUB in SSB mode.
If the same mode in A and B (main and sub) then problem is not active.
It seems to be something around mode switching...
so my few cents...
73!
Lexa, OK1DST
2010/5/31 Barry N1EU
>
>
> JohnK1JD wrot
3.99 is in alpha test at this point. It mainly includes QSK and high
speed CW improvements.
On Mon, May 31, 2010 at 11:58 AM, Fred Atchley wrote:
> John, are you referring to V3.97?
>
> On another note, for my ears, the NR in V3.97 is night and day better than
> any so far. At the lower odd numb
JohnK1JD wrote:
>
> I really like the QSK improvement at ANY speed, but discovered a glitch
> with ver 3.99 this morning. This occurred in split mode (QRQ CW must be
> off to do this) with the sub RX on. The sub RX works fine until
> transmitting, then mutes and will not come back to life until
John, are you referring to V3.97?
On another note, for my ears, the NR in V3.97 is night and day better than
any so far. At the lower odd number settings (e.g. dash 1) The signal is not
significantly degraded but there is a noticeable reduction in noise.
73, Fred, AE6IC, K3 2241
_
All
I really like the QSK improvement at ANY speed, but discovered a glitch with
ver 3.99 this morning. This occurred in split mode (QRQ CW must be off to do
this) with the sub RX on. The sub RX works fine until transmitting, then mutes
and will not come back to life until you turn it off then b
13 matches
Mail list logo
