I'd like to figure out how to get on RTTY by noon tomorrow. I'm working
with N1MM and MMTTY at the moment, with HRD and my trusty paddle as 2nd
and 3rd back-ups.
Transmit control -
It looks like the K3 gives the option of having RTS or DTR actuate the
PTT. MMTTY seems to use both, with no
Regarding VOX - have you tried adjusting VOX gain?
Bob NW8L
On Fri, Jul 18, 2008 at 12:18 PM, Nick-WA5BDU
[EMAIL PROTECTED] wrote:
Second choice is VOX. I set the K3 for AFSK A, connected line out of the PC
to line in of the K3, turned VOX on, told MMTTY to transmit. No VOX
operation.
Hi Bob-
No, I had not tried that. It was at zero. I cranked it up to 25 and
still no luck. Did some searches in the nabble archives and saw that it
might need to be higher yet. So I went to 50 and now it keys the VOX.
I have line in mic gain at about 20. Thanks for the suggestion.
On Fri, 18 Jul 2008 13:18:56 -0500, Nick-WA5BDU wrote:
MMTTY seems to use both, with no choice to use just one.
MMTTY is pretty primative in this regard. It demands a serial port
dedicated ONLY to control of the radio, and a second port for PTT.
73,
Jim K9YC
Are you selecting the correct input for transmit audio (MENU: MIC
SEL)? Front panel (8-pin) vs. rear panel (3.5mm MIC jack) vs. LINE
IN?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
5 matches
Mail list logo
