The answer was obvious and I was dense.
Thank you,
Eric, wb7sde
On Thu, Jul 17, 2014, at 10:29 AM, Nr4c wrote:
> How about the XG3?
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Jul 17, 2014, at 11:43 AM, Eric Ross wrote:
> >
> > Just curious. What does anyone recommend for a signal
ur rig is spread out on
> the bench.
>
> > From: k2av@gmail.com
> > Date: Wed, 16 Jul 2014 16:06:24 -0400
> > Subject: Re: [Elecraft] K3 receiver troubleshooting
> > To: rstea...@hotmail.com
> > CC: elecraft@mailman.qth.net
> >
> > On Wed, Jul 16, 2014 at
bench.
> From: k2av@gmail.com
> Date: Wed, 16 Jul 2014 16:06:24 -0400
> Subject: Re: [Elecraft] K3 receiver troubleshooting
> To: rstea...@hotmail.com
> CC: elecraft@mailman.qth.net
>
> On Wed, Jul 16, 2014 at 10:58 AM, Rick Stealey wrote:
> > Thanks to all who
On Wed, Jul 16, 2014 at 10:58 AM, Rick Stealey wrote:
> Thanks to all who offered helpful suggestions. They were all via email - you
> notice there were no helpful postings on the reflector. Anyway, it's working
> again and I'm a happy camper.
I note you did not post what the actual solution
The schematics in the PDF document are completely searchable - right
down to the individual part numbers, named signals and connector pins.
73 from Ian GM3SEK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
Also how did you fix it?
Tom - wa4ta
> Date: Wed, 16 Jul 2014 09:59:20 -0700
> To: Elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Elecraft] K3 receiver troubleshooting
> From: elecraft@mailman.qth.net
>
> >Thanks to all who offered helpful suggestions. They were al
>Thanks to all who offered helpful suggestions. They were all via email - you
>notice there were no helpful postings on the reflector. Anyway, it's working
>again and I'm a happy camper.
So Rick.. now that you are happy what was the trouble that you found??
Bill - K6WLM
_
On 7/16/2014 7:58 AM, Rick Stealey wrote:
They were all via email - you notice there were no helpful postings on the
reflector.
Something that is very disappointing to all of us on the list.
__
Elecraft mailing list
Home: http://mailma
Yesterday I posted about extremely low receiver sensitivity on my K3, at both
the main antenna input and the receive input on the KXV3 module.
A buddy helped me this morning and we found the problem.
In doing the circuit diagnosis, and we are both somewhat experienced in
technical matters, we be
My K3 suffered a sudden loss of sensitivity this morning. Yes, there was
lightning last night. The antenna input was grounded in an antenna switch but
the receive antenna port was connected to a Beverage.
It appears to be normal in every other way. Transmitter ok. Receiver
functions work,
10 matches
Mail list logo
