SN28XX, V3.68 firmware, re-loaded several times to no avail.
Other than rtm and reading the archives, I've not a clue why this is
happening.
I've followed the steps in the manual to no avail.
*Nothing* but power is connected to the K3.
Unit comes uo on 10MHz WWV, loud and clear and that's about
Dave,
If you really mean that nothing but power is connected, then your K3 has
a problem and it is time for an email to k3supp...@elecraft.com.
But, if you have a key or paddle connected, or a microphone connected or
the RS-232 cable connected, try disconnecting those first.
ERR PTT says
Make sure the PTT-KEY config menu setting is OFF-OFF
73,
Barry N1EU
David Windisch wrote:
SN28XX, V3.68 firmware, re-loaded several times to no avail.
Other than rtm and reading the archives, I've not a clue why this is
happening.
I've followed the steps in the manual to no avail.
I had a similar thing happen to my K3 a few weeks ago. Was getting
ERR PTT with literally nothing but power connected. Only way to turn
it off was to shut down the power supply. Doing an EE INIT didn't fix
it. After disassembling the rig enough to inspect the key jacks and
the front
I've had the same thing happen several times on my K3.
Dunc, W5DC
Joe Planisky wrote:
I had a similar thing happen to my K3 a few weeks ago. Was getting
ERR PTT with literally nothing but power connected. Only way to turn
it off was to shut down the power supply. Doing an EE INIT
5 matches
Mail list logo