Michael,
You probably have "SQ MAIN" set to FM only.
Check out page 60 of the manual.
It will tell you that when in the SQ MAIN configuration selection if you tap
"1" it will toggle between SQ=FM and SQ=ALL.
Rick
K6LE
On 9/4/2011, at 9:25 , n2...@aol.com wrote:
> Hello K3 Users,
>
> I am tr
Hello K3 Users,
I am trying to figure out how to set up the squelch and currently have SQ
MAIN = Sub Pot. When I rotate the RF/ SQL SUB dial I get a "SQL N/A"
message that pops up and goes away.
Any idea why this is coming up and the squelch does not work???
Thank you,
Michael
n2zdb
__
On Tue, 26 May 2009 20:13:39 -0700 (PDT)
Jim - W6VAR wrote:
>
> I just tried listening to a 6M FM net on my K3. I set SQ SUB to Sub Pot and
> noticed that the squelch opens when the sub rf/sql is adjusted full
> clockwise. Backing of slightly closes the squelch. Anyone else observe this.
> Also
I just tried listening to a 6M FM net on my K3. I set SQ SUB to Sub Pot and
noticed that the squelch opens when the sub rf/sql is adjusted full
clockwise. Backing of slightly closes the squelch. Anyone else observe this.
Also, sometimes it goes to 29 and other times to 30 when fully advanced. My
f
Moderator
> _..._
> -Original Message-
> From: Don Wilhelm
> Date: Monday, Mar 23, 2009 7:58 pm
> Subject: Re: [Elecraft] K3 Squelch
> To: gdaug...@stanford.edu
> CC: elecr...@mailman.qth.netreply-to: d...@w3fpr.com
>
> I agree - If I do not find something relevant
Top posting is the requested method on the Elecraft list for exactly the
reasons Don gives below.
73,
Eric WA6HHQ
Elecraft List Moderator
_..._
-Original Message-
From: Don Wilhelm
Date: Monday, Mar 23, 2009 7:58 pm
Subject: Re: [Elecraft] K3 Squelch
To: gdaug...@stanford.edu
CC
On Mon, 23 Mar 2009 22:40:01 -0400, "Guy Olinger, K2AV"
wrote:
>As someone has pointed out to me on two earlier posts from the Nabble
>client, something is amiss in the Nabble reply posts as evidenced below from
>W7TEA. Isn't plain text always supposed to be there?
>
I checked the HTML with an
I agree - If I do not find something relevant in the first few lines of
the post, I usually delete it.
If you can surmise from that comment that *top posting* is important to
me on an email reflector with as much traffic as we have here, then you
are correct - I just don't have the available tim
9:02 PM
Subject: Re: [Elecraft] K3 Squelch
>
> Wayne, a plaintive cry from the wilderness, are 10 hz granularity
> for PBT on CW, and separate volume controls for SPOT and sidetone
> near the top as well?--please??
> 73, Gary W7TEA
> class="quote light-border-color">
Folks,
I find the following unreadable. Is it just me? I suggest sending your posts
in plain
text!
> for PBT on CW, and separate volume controls for SPOT and sidetone
> near the top as well?--please??
> 73, Gary W7TEA
> class="quote light-border-color">
> wayne burdick
> wrote:
> All-mode s
For a major change I can be very patient. Thank you Wayne!
73, Gary W7TEA
wayne burdick wrote:
On Mar 23, 2009, at 6:02 PM, W7TEA
wrote:
> Wayne, a plaintive cry from the wilderness, are 10 hz granularity
> for PBT on CW, and separate volume controls for SPOT and sidetone
> near the top as well
On Mar 23, 2009, at 6:02 PM, W7TEA wrote:
> Wayne, a plaintive cry from the wilderness, are 10 hz granularity
> for PBT on CW, and separate volume controls for SPOT and sidetone
> near the top as well?--please??
Yes.
Thanks for your patience on the 10-Hz issue; it's going to require a
major ch
Wayne, a plaintive cry from the wilderness, are 10 hz granularity
for PBT on CW, and separate volume controls for SPOT and sidetone
near the top as well?--please??
73, Gary W7TEA
wayne burdick wrote:
All-mode squelch is near the top of
our firmware list.
Wayne
N6KR
On Mar 23, 2009, at 12:05 PM,
All-mode squelch is near the top of our firmware list.
Wayne
N6KR
On Mar 23, 2009, at 12:05 PM, Radio Amateur N5GE wrote:
> I've tried to set the squelch on both of my K3's following the
> instructions in the manual and display, but cannot make them work
---
http://www.elecraft.com
_
On Mon, 23 Mar 2009 19:08:40 + (UTC), w...@comcast.net wrote:
>
>I believe squelch only works on FM for now.
>
>Terry
Aw Shucks!
I was afraid of that. Still listening to VHF and UHF white noise here
;o)
Thanks,
Tom, N5GE
K3 #806, K3 #1055
XV144, XV144
W1 and other small kits.
http://www.n
w the sensitivity or the delay
time are adjusted, however.
--- On Mon, 3/23/09, Don Wilhelm wrote:
> From: Don Wilhelm
> Subject: Re: [Elecraft] K3 Squelch
> To: n...@n5ge.com
> Cc: "Elecraft"
> Date: Monday, March 23, 2009, 1:11 PM
> Tom,
>
> Are you in FM mod
Tom,
Are you in FM mode? Currently the squelch only works in FM.
73,
Don W3FPR
Radio Amateur N5GE wrote:
> I've tried to set the squelch on both of my K3's following the
> instructions in the manual and display, but cannot make them work.
>
> I set them both to SQ MAIN = Sub Pot, but when I tur
I believe squelch only works on FM for now.
Terry
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://w
I've tried to set the squelch on both of my K3's following the
instructions in the manual and display, but cannot make them work.
I set them both to SQ MAIN = Sub Pot, but when I turn the Sub Pot I
get the message "SQL N/A".
What have I done wrong?
Tom, N5GE
Hello!
I tried changing the CONFIG:SQ MAIN to SUB-POT as instructed on page 52 of the
K3
Manual, but it did not seem to have any effect on USB and CW modes. It also
did not
seem to make the front panel RF knob work as a squelch in FM mode either - it
only
totally squelched the FM. Of cours
...Does the squelch not work on SSB or am I doing something
wrong?
Squelch is currently only active on FM, I believe.
You can park on the 6m freq and use the NR to reduce the background
noise from SSB. You should still hear all but the weakest signals,
depending on how aggressively you set t
Having a great time with my new K3 #1062 so far !!I have never been on 6
mtrs and decided to give it a try.As I am working from home today I
wanted to leave the K3 on the SSB calling freq and simply monitor. I
tried to change the RF/SQL settings to allow me to squelch the noise -
and..I
Sent: Sunday, May 04, 2008 2:03 PM
Subject: Re: [Elecraft] K3 Squelch problem
...How do I enable the squelch control?
It is always enabled in FM mode, disabled in other modes at present. The
squelch knob is the outer knob on the concentric pot you u
...How do I enable the squelch control?
It is always enabled in FM mode, disabled in other modes at present.
The squelch knob is the outer knob on the concentric pot you use for RF
gain.
73,
Lyle kK7P
___
Elecraft mailing list
Post to: Elecraft@m
Hi,
I am having a problem adjusting the squelch.
I made a 6 meter fm repeater contact this morning, but the other station was
breaking up (he said my audio was fine). I thought the squelch threshold
must be set too high. In trying to set that value in the config menu I
get -- for a value and can
Well that clears it up and makes sense too. I thought I was going crazy!
Thanks for the clarification and quick response.
Mike N8XPQ
Joe Stofko-2 wrote:
>
>
>
> Hi Mike,
>
> You wrote:
> Am I missing something? I can not seem to enable the "squelch"
> function in
> the menu.
Hi Mike,
You wrote:
Am I missing something? I can not seem to enable the "squelch"
function in
the menu.
Nope, you are not missing anything. The squelch feature is not
yet enabled in firmware. I do not know if it will be an "all-mode"
squelch, but I expect it will not be avai
Am I missing something? I can not seem to enable the "squelch" function in
the menu. The setting shows
SQ Main --. It seems that I am unable to change this feature. Has anyone
else discovered this?
-
Mike Koetje N8XPQ
--
View this message in context:
http://www.nabble.com/K3-Squelch-Funct
28 matches
Mail list logo
