wer.
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Charlie
T, K3ICH
Sent: Monday, March 20, 2017 5:13 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Stops Transmitting (solved)
Well, at least you did (a logical) SOMETHING which in all probability, fixed
the
an.qth.net] On Behalf Of Dennis
Sent: Monday, March 20, 2017 7:34 AM
To: Reflector Elecraft <elecraft@mailman.qth.net>
Subject: [Elecraft] K3 Stops Transmitting (solved)
A couple of weeks ago I posted that my K3 suddenly stopped transmitting
during ARRL CW.
The PTT would enable, it was not in TEST mode
A couple of weeks ago I posted that my K3 suddenly stopped transmitting
during ARRL CW.
The PTT would enable, it was not in TEST mode, the CW monitor would
sound, but no output.
Pushing the TUNE button would result in "0 watts" showing on the
display. The problem
persisted after I power cycled
Correction to Item 2. I meant to write "A floating *PIN 7* (TX INH) can
cause TX to be intermittently inhibited..."
73,
Bob, N6TV
On Thu, Mar 9, 2017 at 6:50 PM, Bob Wilson, N6TV wrote:
> No TX power is a common problem, especially on DXpeditions. Other than
> power supply
No TX power is a common problem, especially on DXpeditions. Other than
power supply issues, it is usually one of three things:
1. Intending to use the BAND button, one holds down the right MODE
button by mistake, putting the K3 into TX TEST mode. The "TX" icon
flashes. But, since you
power.
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dennis
Sent: Thursday, March 9, 2017 6:41 AM
To: Jim Stahl <jimk...@aol.com>
Cc: Reflector Elecraft <elecraft@mailman.qth.net>
Subject: Re: [Elecraft] K3 Stops Transmitting
I did try the "drop" t
I did try the "drop" test- hold up the front of the radio a little bit,
and then drop it so that it contacts the table.
Kinda shake things up a bit. No luck. When I also brought it home, I
put it in the case, drove it 72 miles
back to my house, brought it in, and set it up 2 days later. So it
First thing I did- and the first thing I do whenever I have any funny
happen- is to cycle power. I did so
several times. It still wouldn't transmit.
UE
On 3/9/2017 9:00 AM, Ed Muns wrote:
When it was not transmitting and you were troubleshooting, did you cycle power?
73,
Ed W0YK
On Mar 9,
I had a similar event last October in the New York QSO Party with my K3,
s/n67xx. After the first QSO (from a beautiful overlook in Fort Tryon Park in
Manhattan) it simply stopped putting out RF. It went into transmit, just no RF.
I tried power cycling, jiggling external connectors, etc. After
When it was not transmitting and you were troubleshooting, did you cycle power?
73,
Ed W0YK
On Mar 9, 2017 5:54 AM, Dennis wrote:
>
> In the middle of ARRL DX CW, my K3 stopped transmitting. It did not
> shut off, it
> would go into transmit and there were small
Hi Dennis,
I am certain you checked for this issue but my first thought would be that you
had a power supply issue or power cable issue.
73, John WB4YAL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
In the middle of ARRL DX CW, my K3 stopped transmitting. It did not
shut off, it
would go into transmit and there were small flickers in ALC when the
meter was in
that position, but no power out. Pushing the TUNE button resulted in
the display
saying "0 watts". I played with it for several
12 matches
Mail list logo