...
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wes Stewart
Sent: Saturday, February 06, 2010 9:09 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 Utility program issue
I've been meaning to query the group
I've been meaning to query the group about this for some time but the latest
episode has finally prodded me into asking.
I have noted before that when I ran the utility program after closing it and
then trying to use my logging program, the log couldn't connect using the
serial port.
Hi,
Yes, I have the same problem and Elecraft has been made aware of it. I
almost never use the utility for anything else than downloading new
firmware, but I can believe that the program opens the com port whether it
needs it or not.
Knut - AB2TC
Wes Stewart wrote:
I've been meaning to
It's not a problem here.
Dunc, W5DC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
I have an issue whereby i cannot run cw from my k3 serial port and
logging software WT.
Bob N6TV has been looking into it for me but. Still cannot tx.
Was their a solution to get it released from the utility!
73's
Ken..G0ORH
Sent from my iPhone
On 6 Feb 2010, at 17:38, ab2tc
I can recall seeing this a couple of times, but not recently. The utility
does open the com port and try to interrogate the radio to find out what
firmware is installed, regardless of whether you use it for anything. The
problem may be related to using the VSPE virtual serial port software, since
to own a k3
--- On Sat, 2/6/10, Duncan Carter d...@vibrotek.com wrote:
From: Duncan Carter d...@vibrotek.com
Subject: Re: [Elecraft] K3 Utility program issue
To: ab2tc ab...@arrl.net
Cc: elecraft@mailman.qth.net
Date: Saturday, February 6, 2010, 5:43 PM
It's not a problem here.
Dunc, W5DC
The K3 Utility closes the serial port at exit. Windows process
termination also closes open file handles. However the close process
invokes device drivers to actually release the hardware, and sometimes
that doesn't work as you might hope.
Dick, K6KR
Sent from my iPhone
On Feb 6, 2010,
I always shut down LP-BRIDGE, a virtual port program used for sharing the K3
serial port, before starting up the K3 utility. If memory serves, this was
addressed early on and recommended.
Monty K2DLJ
I can recall seeing this a couple of times, but not recently. The utility
does open the
9 matches
Mail list logo