No, it’s the multi-core cable with a 15 pin plug on each end.
Check Page 5 of the KAT500 manual.
73,
Alan - G4GNX
South Coast UK
Elecraft K4D / KPA500 / KAT500 / IC-9700
> On 4 Nov 2023, at 21:50, Jim Cary wrote:
>
> The Aux i/o is the one with phono type plug on the end, correct?
>
_
The Aux i/o is the one with phono type plug on the end, correct?
> On Nov 4, 2023, at 3:50 PM, Jack Brindle wrote:
>
> This is pretty simple, Jim. The AuxIO cable goes from the K3 to the KAT500.
> Then one of the Antenna outputs of the K3 goes to the RF input of the KAT500.
> Of course the ante
This is pretty simple, Jim. The AuxIO cable goes from the K3 to the KAT500.
Then one of the Antenna outputs of the K3 goes to the RF input of the KAT500.
Of course the antennas connect to the KAT500 then (as they did before).
That is pretty much it.
73,
Jack, W6FB
> On Nov 4, 2023, at 3:03 PM,
I’ve had to take my KPA500 out of service and want to operate just with the K3
and KAT. I’ve tired different cabling configurations but can’t seem to get the
k3 to communicate. The manuals show all sorts of connections with amps, but
not without an amp.
I know it has to be simple, but sure is
4 matches
Mail list logo
