Roger,
That statement does not make a lot of sense - explanation below:
With the K3 (and K3S, KX3 and KX2), there are no specific CW and SSB
filters - as there is with the K2.
The DSP filter bandwidth is set with the WIDTH/SHIFT (or HI CUT.LO CUT)
knobs and any roofing filters will switch in a
I tried it in LSB mode and it works fine! I checked and both the CW and SSB
fikters are selected for data mode.
On 10/10/2017 5:36 PM, Don Wilhelm wrote:
Roger,
I assume you are using AFSK A data sub-mode. Check the data submode to be
certain.
Do you have anything other than the soundcard
Roger,
I assume you are using AFSK A data sub-mode. Check the data submode to
be certain.
Do you have anything other than the soundcard audio lines, the RS-232
computer connection, the DC power cable, the wattmeter and antenna (or
better yet a dummy load) connected to the K3?
If so remove
You should be in AFSK A mode. RTTY is a leer sideband mode.
Sent from my iPhone
...nr4c. bill
> On Oct 10, 2017, at 4:37 PM, Roger D Johnson wrote:
>
> I'm trying to get my system set up for RTTY. I think I have the cabling
> OK. Using MTTY I can decode signals fine but when I try to transmit
I'm trying to get my system set up for RTTY. I think I have the cabling
OK. Using MTTY I can decode signals fine but when I try to transmit,
I get no power out. The MTTY program keys the VOX and I have 5
bars of ALC but nil on the wattmeter!
Help!
73, Roger N1RJ
___
5 matches
Mail list logo
