Eric Swartz - WA6HHQ, Elecraft wrote:
>Don - On the K3 you can enable and disable the mic bias to
pin 1 from the menu, so it will work both with our microphones and any
other dynamic mic.
With all due respect Eric and Wayne...
Is there ANYTHING you guys DID NOT think of?
Looking
Thanks for that additional info Eric.
73,
Don W3FPR
Eric Swartz - WA6HHQ, Elecraft wrote:
Don - On the K3 you can enable and disable the mic bias to pin 1 from
the menu, so it will work both with our microphones and any other
dynamic mic.
Also we have added more microphone input gain (adjust
Don - On the K3 you can enable and disable the mic bias to pin 1 from
the menu, so it will work both with our microphones and any other
dynamic mic.
Also we have added more microphone input gain (adjustable) so operation
with the Heil HC4/5 mic's will be no problem.
73, Eric WA6HHQ
Barry,
I believe the K3 comes permanently wired for the Elecraft microphones,
and that means there is a resistor between 5 volts and pin 1 (AF). If
one wants to use a microphone that would object to having that voltage
present on pin 1, a series DC blocking capacitor should be used.
My reas
I thought the 5V went to pin 6. AF is pin 1.
But I'm confident Elecraft have thought of this...
Julian, G4ILO
Barry McWilliams wrote:
The wiring for the K2 MD-2, MH-2 microphones and the Heil headset has 5V
applied to pin 1 through a 5.6k resistor.
Will the K3 be able to supply 5V on pin 1 th
Thanks for the additional information in the FAQ about microphones.
But I still have a question.
The wiring for the K2 MD-2, MH-2 microphones and the Heil headset has 5V
applied to pin 1 through a 5.6k resistor.
Will the K3 be able to supply 5V on pin 1 through a 5k resistor via a
jumper or s
6 matches
Mail list logo
