Truer words were never spoken. I agree with all.
Mike K1AMS
-Original Message-
From: Bill Clarke
Sent: Saturday, March 02, 2013 5:48 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 on order
I have had my K3 for about a year now. There have been some teething
pains and
I have had my K3 for about a year now. There have been some teething
pains and I have been vocal about it. However, that said - my K3 is,
without a doubt, the best rig I have owned in well over 50 years of
operating.
The ability to customize the rig to be your own makes it very desirable
- so
List , Nick Palomba
, Benson Wills
Subject: RE: [Elecraft] K3 on order
FTdx9000d
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qt
; Nick Palomba; Benson Wills
Subject: RE: [Elecraft] K3 on order
fred
I replaced am FTdx9000d with my K3 and i lost nothing in performance.
nice thing about Elecraft is the K3 just keeps getting better.
wish i could say thrvsame about my smartr-than-me mobile phone.
An Elecraft phone would
*
>
> Fred/N0AZZ
>
> ** **
>
> *From:* Gary Gregory [mailto:vk1zzg...@gmail.com]
> *Sent:* Saturday, March 02, 2013 5:17 AM
> *To:* Fred Smith
> *Cc:* Nick Palomba; Benson Wills; elecraft@mailman.qth.net
> *Subject:* Re: [Elecraft] K3 on order
>
> ** *
, 2013 5:37 AM
To: Fred Smith; 'Benson Wills'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 on order
It's possible that they didn't misinform me as much as I read it wrong so
thank you!!! Great to know since I wanted to put as much together as
possible in the first
: Saturday, March 02, 2013 5:17 AM
To: Fred Smith
Cc: Nick Palomba; Benson Wills; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 on order
I would like to know exactly what/which model transceiver meets the K3
specifications AT the same or lower cost.
I don't know of any, but, I could be
t;
>
>-Original Message-
>From: elecraft-boun...@mailman.qth.net
>[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Nick Palomba
>Sent: Friday, March 01, 2013 7:45 PM
>To: Benson Wills
>Cc: elecraft@mailman.qth.net
>Subject: Re: [Elecraft] K3 on order
>
>http://nic
3 7:45 PM
To: Benson Wills
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 on order
http://nicktoday.com/elecraft-k3-and-n1ic-page-2/
I also put in order in for some add ons already :)
From: Benson Wills
Date: Friday, March 1, 2013 8:05 PM
To: Nick Palomba
Cc:
Subject: Re: [Elec
to:elecraft-boun...@mailman.qth.net] On Behalf Of Nick Palomba
> Sent: Friday, March 01, 2013 7:06 PM
> To: Benson Wills
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 on order
>
> I have had a few people complain about costs but from everything I have
> read
> ab
n Wills
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 on order
I have had a few people complain about costs but from everything I have read
about the support and build quality I am confident with this decision.
From: Benson Wills
Date: Friday, March 1, 2013 8:05 PM
To: Nick Palomba
Cc:
http://nicktoday.com/elecraft-k3-and-n1ic-page-2/
I also put in order in for some add ons already :)
From: Benson Wills
Date: Friday, March 1, 2013 8:05 PM
To: Nick Palomba
Cc:
Subject: Re: [Elecraft] K3 on order
I have never regretted my K3 purchase. Even when the KIO3 board flaked
I have had a few people complain about costs but from everything I have read
about the support and build quality I am confident with this decision.
From: Benson Wills
Date: Friday, March 1, 2013 8:05 PM
To: Nick Palomba
Cc:
Subject: Re: [Elecraft] K3 on order
I have never regretted my K3
I have never regretted my K3 purchase. Even when the KIO3 board flaked out.
On Fri, Mar 1, 2013 at 7:35 PM, Nick Palomba wrote:
> Well, I made the plunge and I am looking forward to this purchase!!! Going
> to post pictures of my build on my blog if anyone wants to follow along
> http://nicktod
Well, I made the plunge and I am looking forward to this purchase!!! Going
to post pictures of my build on my blog if anyone wants to follow along
http://nicktoday.com/elecraft-k3-and-n1ic-my-build-page-1/
-Nick N1IC
__
Elecraft maili
7; Cooke
K5EWJ
From: Chris Hembree
To: Tom W8JI ; Larry 'Rebar' Rebarchik - N6CCH
; n...@contesting.com
Cc: elecraft@mailman.qth.net
Sent: Fri, July 16, 2010 9:08:36 PM
Subject: Re: [Elecraft] K3 on Order
Very good Point..
What switching supply'
Very good Point..
What switching supply's are you using?
Thanks
Chris
From: Tom W8JI
To: Chris Hembree ; Larry 'Rebar' Rebarchik - N6CCH
; n...@contesting.com
Cc: elecraft@mailman.qth.net
Sent: Fri, July 16, 2010 6:35:06 PM
Subject: Re: [
On Jul 16, 2010, at 5:35 PM, Tom W8JI wrote:
>> My concern for any Switching supply is the RFI noice that the
>> radio will
>> pick up
>> from the power supply. Looking at the SEC 1235m, I was reading
>> that it has
>> a
>> build in RFI filter. Plus I like the AD5X mod to slow down the
>> f
I bought a PowerWerx SS-30 at Dayton this year and used it at Field Day. It
powered my K3 for the entire 24 hours without any problem. No RF noise
detected. The fan noise is noticeable but not with headphones. Several people
commented on it's small size. Now I use it in the shack as my main powe
> My concern for any Switching supply is the RFI noice that the radio will
> pick up
> from the power supply. Looking at the SEC 1235m, I was reading that it has
> a
> build in RFI filter. Plus I like the AD5X mod to slow down the fan. And
> the
> Alinco DM-340 MVT has a knob to change the freq.
Chris,
You say, not much room - how about a linear supply on the floor under
the desk? It does not take up much space there. None of my power
supplies occupy desk space.
73,
Don W3FPR
Chris Hembree wrote:
> I did not know about the Power-werx SS-30DV. I will look into this one as
> well.I
>
0 8:52:51 AM
Subject: Re: [Elecraft] K3 on Order
You may also want to look at the solid-state PS from http://Power-werx.com
model=SS-30.
I picked up one in a raffle and it powers the K3 just fine with a very
small footprint, two power poles in the front and a pair of terminals in
the back.
I have
The main reason why most devices take DC in rather than bringing in
direct AC is because they can pass all the safety work on to the brick
manufacturer and it saves them a lot of money in the regulatory end.
~Brett (N7MG)
On Fri, Jul 16, 2010 at 9:08 AM, Paul Christensen wrote:
>> Sharing a sing
!
--
Message: 15
Date: Thu, 15 Jul 2010 16:17:26 -0700
From: Wayne Burdick
Subject: Re: [Elecraft] K3 on Order
To: Chris Hembree
Cc: elecraft@mailman.qth.net
Message-ID:
Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
Hi Chris,
Hope you enjoy your K3.
One thought
> Sharing a single power supply between the transmitter and
> accessories is a very good way to create "RFI" (even with
> a dummy load) due to the "pin 1" problem in nearly every
> amateur rig ever built.
I completely agree with Joe, but I'm guilty of using a common supply for the
K3 and switching
While I can't disagree with the recommendation for a linear
supply (I have an Astron RS-35A for each K3), I recommend
avoiding the PowerPole distribution blocks and would power
station accessories - particularly any accessory that touches
the audio - in the shack from a SEPARATE supply.
Sharing a
I believe. I've looked at the 30 amp version of that, and
>> the
>> price is tempting, for sure, and I like the light weight instead of
this
>> 30
>> lb monster I have, hi.
>> 73,
>> Don, WB5HAK
>> - Original Message -
>> From: "Chris
Astron RS-35M
Linear (no noise) with meter. Last 12V supply you will
need. Build an Anderson supply cable. Use a "Red-Dee 2
Connect" 8 way Anderson distribution
block
http://www.reddee2.com/
Much less expensive than the others and they work well.
73
K1NR
K2 Sn 6K
On Thu,
ree"
> To:
> Sent: Thursday, July 15, 2010 5:39 PM
> Subject: [Elecraft] K3 on Order
>
>
>
>> Well I took the BIG plunge today, K3/100, 2.8 up Grade filter, FM
>> filter,6m
>> preamp.
>> Any recommendation on a power supply?
>>
>> Chris
I have an Astron RS-35M as my power supply through a Rigrunner to my K3/10.
Enough left to upgrade to K3/100.
73s de Dave KJ6CBS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mai
y, July 15, 2010 3:39 PM
Subject: [Elecraft] K3 on Order
> Well I took the BIG plunge today, K3/100, 2.8 up Grade filter, FM
> filter,6m
> preamp.
> Any recommendation on a power supply?
>
> Chris W7CTH
>
>
>
>
> __
On Thu, 15 Jul 2010 18:39:20 -0400, Chris Hembree wrote:
> Well I took the BIG plunge today, K3/100, 2.8 up Grade filter, FM
> filter,6m
> preamp.
> Any recommendation on a power supply?
>
> Chris W7CTH
Yup .. I'd get something around 13.8V - 30A surge :p
All kidding aside, pick the on
Hi Chris,
Hope you enjoy your K3.
One thought: If you operate any CW or narrowband data at all, I think
you'll want at least one narrow filter (500 or 400 Hz). It'll make a
huge difference in crowded band conditions. If you're strictly into
voice modes, you can do without.
73,
Wayne
N6KR
I bought an MFJ 4125P a few days before I received my K3 so I would have
something that would work and would be easily portable and with the
intention of buying a power supply for non-portable use later, which I
haven't done yet. The MFJ 4125P is somewhat, but not terribly noisy.
In my case,
f that, and the
price is tempting, for sure, and I like the light weight instead of this 30
lb monster I have, hi.
73,
Don, WB5HAK
- Original Message -
From: "Chris Hembree"
To:
Sent: Thursday, July 15, 2010 5:39 PM
Subject: [Elecraft] K3 on Order
> Well I took the BIG
Welcome to the family.
I'm using an Astron RS-35M, it's what I had. I found I had to set the output to
13.8V
for the K3 to operate correctly.
73, Mike NF4L
On 7/15/2010 6:39 PM, Chris Hembree wrote:
> Well I took the BIG plunge today, K3/100, 2.8 up Grade filter, FM filter,6m
> preamp.
> Any
Well I took the BIG plunge today, K3/100, 2.8 up Grade filter, FM filter,6m
preamp.
Any recommendation on a power supply?
Chris W7CTH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://
37 matches
Mail list logo