Thanks, Dick.
Looks like all are done except the 12V sense one. It sure would be nice
if the two web pages were linked, and the same descriptive name of the
mod was used in both places.
Mike NF4L
k8...@mho.com wrote:
> Mike,
>
> I received my K3 in Jun of last year (ordered at Dayton). The on
Mike,
I received my K3 in Jun of last year (ordered at Dayton). The only "mods" that
were not done on mine were the new DSP board, the IF buffer mod, extreme signal
protection, and VFO noise one.
All of those were released way after I purchsed my K3; with that said, if the
K3 had the IF buffe
Mike,
Look at the Elecraft website page for K3 Mods + App Notes rather than
the order page to see a more detailed description for each mod. If your
K3 is near the cut-in date, then open the Mod instructions and do the
steps given in the " How do I determine if I already have this" section
of
Interesting The post in my "sent" folder has the content. Wonder
where it went.
Try # 2
++
While I have #3539 apart for the DSP board change, I thought I'd see if
I have all the latest and greatest innards.
Looking at the spare parts and mo
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
___
From: "n0...@cox.net"
To: Elecraft@mailman.qth.net
Sent: Fri, January 15, 2010 10:05:41 AM
Subject: [Elecraft] K3 updates
Does Elecraft offer an update service that would install all updates required
to bring an older radio up to the current configuration or as close
On Fri, 15 Jan 2010 11:05:41 -0500, wrote:
>Does Elecraft offer an update service that would install all updates required
>to bring an older radio up to the current configuration or as close as
>possible?
>
>I looked on the website but didn't see any mention of such a service.
>
[snip]
I'm sure
Does Elecraft offer an update service that would install all updates required
to bring an older radio up to the current configuration or as close as possible?
I looked on the website but didn't see any mention of such a service.
Thanks,
Jeff
___
You mean his book of spells and black cat?
Geoff
GM4ESD
On Tuesday, July 21, 2009 at 6:00 PM, Stewart Baker wrote:
> I hope that he took his laptop with the K3 development software installed
> :-))
> On Tue, 21 Jul 2009 09:29:18 -0700, Mike Scott wrote:
>> Wayne went on a 3-week vacation :)
On Tue, 21 Jul 2009 09:29:18 -0700, Mike Scott wrote:
>> What has happened to the frequent K3 beta updates and all the
>>chatter that accompanied them? I haven't kept up with the list very well
>>but have noticed that content seems to be missing these days.
>
>
> Wayne went on a 3-week vacati
> What has happened to the frequent K3 beta updates and all the
>chatter that accompanied them? I haven't kept up with the list very well
>but have noticed that content seems to be missing these days.
Wayne went on a 3-week vacation :)
Mike Scott - AE6WA
Tarzana, CA (DM04 / near LA)
NAQCC
sr...@swbell.net wrote:
It could be that they are working on firmware for the W2 and K144XV
firmware. They have said they will be shipping both in mid August.
N5GE
> What has happened to the frequent K3 beta updates and all the
> chatter that accompanied them? I haven't kept up with the l
Summer time = vacation time.. ;-)
We're back now and hard at work.
73, Eric WA6HHQ
---
> On Mon, 20 Jul 2009 12:21:57 -0500, sr...@swbell.net wrote:
>
>> What has happened to the frequent K3 beta updates and all the
>> chatter that accompanied them? I haven't kept up with the list ve
The Gurus must be working on some massive release of new firmware :-)
Stewart G3RXQ
On Mon, 20 Jul 2009 12:21:57 -0500, sr...@swbell.net wrote:
> What has happened to the frequent K3 beta updates and all the
> chatter that accompanied them? I haven't kept up with the list very well but
> h
What has happened to the frequent K3 beta updates and all the
chatter that accompanied them? I haven't kept up with the list very well but
have noticed that content seems to be missing these days.
Stan Rife
W5EWA
__
Elecraf
one because you hear band
noise and then it starts updating again. Maybe Elecraft can figure out a way
for the display to say PLEASE WAIT.
N4LQ
Steve Ellington
n...@carolina.rr.com
- Original Message -
From: "Oliver Johns"
To:
Sent: Friday, April 17, 2009 7:53 PM
Subject: [Ele
There have been a spate of anomalies reported after uploading new
firmware to the K3. Maybe these could be avoided by using the
following procedure:
(1) First, BEFORE any change of firmware, use the K3 utility to save
a copy of your settings.
(2) Now do the upload of new firmware to the
> Discovered the value of transparent Scotch
> tape.
ah yes. The day we switch to optical readers was a day of
celebration! The old mechanical readers were slow and noisy.
Mark AD5SS
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You mus
And after a series of 360s, 370s and B5000s I graduated to HP minis
and , gaak!, paper tape. Discovered the value of transparent Scotch
tape.
Doug, W6JD
-- Original message --
From: [EMAIL PROTECTED]
> But when you dropped that deck on the floor and became a
> true bel
But when you dropped that deck on the floor and became a
true beliver in sequence numbers!
One who cut his teeth on IBM-650s.
Ah, the good old days, back when we measured program size in inches,
i.e. the program is 18 inches tall...
vy 73 de toby
_
Yep, Univac here and seq numbers in 10s in the 73-80 column - the reason
Fortran only used cols 1-72!
On 05/03/2008 21:37, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> sent:
> But when you dropped that deck on the floor and became a
> true beliver in sequence numbers!
>
> One who cut his teeth on IB
But when you dropped that deck on the floor and became a
true beliver in sequence numbers!
One who cut his teeth on IBM-650s.
Doug, W6JD
-- Original message --
From: "Bill W5WVO" <[EMAIL PROTECTED]>
> G4ILO wrote:
>
> > not quite as bad as when I learned to program,
G4ILO wrote:
not quite as bad as when I learned to program, when you had to get
the code punched up on cards, then take the deck down to the computer
room and put it in the "in" tray, then wait a couple of hours until
they had time to run it.
And then when you went back down to the computer to
s clean as
possible.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of G4ILO
Sent: Wednesday, March 05, 2008 1:17 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Updates
Dave Martin-2 wrote:
>
> I imagine so. I've found that at my place
Dave Martin-2 wrote:
>
> I imagine so. I've found that at my place it takes a long time even
> to produce buggy code. You guys are writing good stuff. You're "the
> berries".
>
Having to go through that process every time they want to test it must be a
good incentive to write code that is *n
bject: [Elecraft] K3 Updates
Laughing out loud, rolling on the floor, funny!
Can you tell I code for a living? If it took as long
to load as it does to code and test - ack - ha!
load line...
load line...
syntax error
recode
load line...
coffee break
load line... load line... load line...
what
Laughing out loud, rolling on the floor, funny!
Can you tell I code for a living? If it took as long
to load as it does to code and test - ack - ha!
load line...
load line...
syntax error
recode
load line...
coffee break
load line... load line... load line...
what's on MSN?
New Ipod, huh
On Tue, Mar 4, 2008 at 2:22 PM, Lyle Johnson <[EMAIL PROTECTED]> wrote:
> > Did my first update to the K3 firmware last night. I was surprised how
> > long it took. About a minute for the Rig and about 4 minutes for the DSP
> > unit.
>
> When you compare to how long it took to write the code,
Did my first update to the K3 firmware last night. I was surprised how long it
took. About a minute for the Rig and about 4 minutes for the DSP unit.
When you compare to how long it took to write the code, the load time is
instantaneous!
73,
Lyle KK7P
, K6KR
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee Buller
Sent: Tuesday, March 04, 2008 10:55 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 Updates
Did my first update ot the K3 firmware last night. I was surprised how long
it took. About a mi
Did my first update ot the K3 firmware last night. I was surprised how long it
took. About a minute for the Rig and about 4 minutes for the DSP unit.
Question...there was another file DS2 or something like that. Is that for the
sub RX when it is installed?
Lee
K0WA
443
In our day and ag
31 matches
Mail list logo
