I use my K3 with HRD software and have the PTT working with all the digital
modes except CW.
There are four different drop down types in HRD and I have tried them all with
the PTT. The only way I get CW to work is using VOX.
This makes no difference if I use DATA Mode, USB or LSB, or CW for
Hello Don
There are four settings under the cw mode in Hrd. Cw, and winkey do not
work with the K3 alone. The ky and mcw work good with the K3. Mcw is used
with vox and the tones key the radio. Only down fall is you have to use the
stop in macros or click the stop button. The kycw is for elecraft.
Don,
The K3 requires VOX be active to send CW. Please check the K3 user's
manual under CW operations.
73,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3 #688
HRD v5.x/6.0 Test Team
On 11/11/2012 8:31 AM, KD8NNU wrote:
I use my K3 with HRD software and have the
Yes, vox on mcw. Not needed on cwky.
On Nov 11, 2012 4:43 PM, Ian Kahn - Ham km4ik@gmail.com wrote:
Don,
The K3 requires VOX be active to send CW. Please check the K3 user's
manual under CW operations.
73,
--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3
I do not know what *cwky* might be, but the K3 will respond to a key
closure if VOX is selected. If VOX is not selected, one must close PTT
or tap the XMIT button to enable the transmit mode before beginning CW
transmission.
73,
Don W3FPR
On 11/11/2012 5:49 PM, Gerald Manthey wrote:
Yes,
, November 11, 2012 6:35 PM
To: Gerald Manthey
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 with HRD using CW modes
I do not know what *cwky* might be, but the K3 will respond to a key
closure if VOX is selected. If VOX is not selected, one must close PTT
or tap the XMIT button to enable
6 matches
Mail list logo