It's unclear to me what the setting for KRX3 should be.
1. I do have the KRX3A installed.
2. I do NOT have an antenna on the BNC, nor on ANT2..
3. I have a SINGLE SIGNAL PATH from antenna to K3S on ANT1.
When I set KRX3 to KAT3, I believe it changes the sub antenna to K3S ANT2.
This follows the
Hi Byron,
If you have the BNC connector then it seems logical that you choose BNC when
setting up the KRX3. From there the solution is quite simple. Just be sure
when activating the Sub RX that the word MAIN comes up in the lower display.
This tells you that the Sub RX is using the same antenna
er 18, 2015 7:52 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] K3S Config: Sub-Receiver Signal Path without BNC Antenna
It's unclear to me what the setting for KRX3 should be.
1. I do have the KRX3A installed.
2. I do NOT have an antenna on the BNC, nor on ANT2..
3. I have a SINGLE SIGNAL PATH from
3 matches
Mail list logo
