That is the E100719 bracket I designed to hold the KPA3 in during shipping.
Mike; I will send you a picture in another email that allows attachments.
There is a Philips pan head screw, 4-40 by 1/4 inch black just above the
ground lug that holds it in.
Search for that (no washer).
Anyone else can
I checked the interior of my K3 with the
new KPA3A 100 watt PA module installed.
There is an L-shaped hold-down bracket on the rear
edge of the KPA3A board, which is secured
to the rear fan panel with a single screw
(not visible from the top opening of the case).
It matches the dimensions of the br
Hi Mike (K4PI),
I recall a bracket like the one you described
from my recent addition of the KPA3A 100
watt PA module to my much older K3/10.
I don't find mention of it in the KPA3A manual,
but my recollection is that it was installed
on the rear panel of the K3 to stabilize/hold
down the KPA3A mo
Possibly the hold down bracket for the sub receiver?
Larry k6ro
www.LSRarecoins.com
310-710-2869
> On Jun 1, 2024, at 7:26 PM, K4PI.Mike Greenway wrote:
>
> This is more for someone who built a K3 in the past and might recognize the
> following item.. I bought a K3S and got it home and
This is more for someone who built a K3 in the past and might recognize
the following item.. I bought a K3S and got it home and moved it around
I could hear something metallic tumbling around inside. After
disassembly I found it down under the KPA100 module. It is an L shaped
piece of aluminu
5 matches
Mail list logo
