I used a simple 4-pin clock-oscillator running at 7.32mhz.
Runs on 5VDC.
Put it in a project box with LM7805 and a 12 inch wire as antenna.
Can't use that as a signal generator for circuit tracing though without
seriously limiting its output.
But it makes for a simple little qrp xmitter.
With
is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of dw
Sent: Monday, October 12, 2015 2:03 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S Radio check? (signal generator
I'm not sure if my antenna/coax/radio is deaf because I can hear some
signals. Is there a way to quantify and verify that at least the radio is
receiving as designed ? The K3S, antenna, and coax are all new.
Without a signal generator or such I'm not sure how this can be
accomplished. I was
propagation/solar conditions will be in
play as well.
73,
Cliff K3LL/6
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
ae...@carolinaheli.com
Sent: Sunday, October 11, 2015 12:20 PM
To: 'ELECRAFT'
Subject: [Elecraft] K3S Radio check?
I'm not sure if my
11, 2015 12:44 PM
To: 'Cliff Frescura'; ae...@carolinaheli.com; 'ELECRAFT'
Subject: Re: [Elecraft] K3S Radio check?
2.5 nothing band noise
5 nothing just band noise
10 signal S6.5 with lots of band noise but readable
15 S6.5~S7 readable and clear with band noise
20 S8.5 very strong with almost
if that matters..
I'm thinking everything is working and I just need better antennas.. ?
Thanks in advance.
-Original Message-
From: Cliff Frescura [mailto:c...@cfcorp.com]
Sent: Sunday, October 11, 2015 3:35 PM
To: ae...@carolinaheli.com; 'ELECRAFT'
Subject: RE: [Elecraft] K3S Radio check
has gone deaf
later.
Ron AC7AC
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
ae...@carolinaheli.com
Sent: Sunday, October 11, 2015 12:44 PM
To: 'Cliff Frescura'; ae...@carolinaheli.com; 'ELECRAFT'
Subject: Re: [Elecraft] K3S Radio check?
2.5
40 meters is alive with signals as of 16:50 Eastern time. If you don't
have that - something is wrong in your system. No signal generator
needed for that test.
Bill W2BLC K-Line
__
Elecraft mailing list
Home:
Jerry,
I had a 2 foot long alligator clip lead on the antenna input of my K3s
today and was hearing cw signals all over 40 meters.
K3s is a pretty hot receiver.
You might try to connect up a wire 5-10 feet long to the ANT 1 input.
Put the rig in TEST mode and see what you hear.
Fingers crossed
Make certain that the selected antenna input is correct.
Bill af4b
Sent from my iPad
> On Oct 11, 2015, at 6:32 PM, dw wrote:
>
> Jerry,
> I had a 2 foot long alligator clip lead on the antenna input of my K3s
> today and was hearing cw signals all over 40 meters.
>
> K3s
10 matches
Mail list logo