I will be putting my K3S on the bench this weekend to try to trace an
intermittent bug. Elecraft support has suggested removing the front panel
and checking the seating of the multi-pin connectors.
Are there any tips to make the replacement easier? As I recall that was
the single most nerve-wrac
Chuck,
Removing the front panel is easy. It is separating the front panel and
DSP board which is more involved.
All you have to do is remove the screws and pull the front panel board
off. There are rectangular cutouts on the bottom which can be used to
pry the front panel off with a screwd
... and remove the exterior nut on the head-fone jack
73 Dwight NS9I
On 3/16/2017 10:09 AM, Don Wilhelm wrote:
Chuck,
Removing the front panel is easy. It is separating the front panel
and DSP board which is more involved.
All you have to do is remove the screws and pull the front panel
Dwight,
That is not necessary when removing the front panel assembly.
It *is* necessary if you separate the DSP board from the Front Panel board.
73,
Don W3FPR
On 3/16/2017 2:51 PM, 'DGB' wrote:
... and remove the exterior nut on the head-fone jack
73 Dwight NS9I
On 3/16/2017 10:09 AM, Don
Go slow and carefully.
Sent from my iPhone
...nr4c. bill
> On Mar 16, 2017, at 10:01 AM, Chuck Chandler wrote:
>
> I will be putting my K3S on the bench this weekend to try to trace an
> intermittent bug. Elecraft support has suggested removing the front panel
> and checking the seating of t
Thank you Don, I stand corrected, as that is what I had to do.
BTW thank you for all your contributions to this group and ham radio.
73 Dwight NS9I
On 3/16/2017 2:17 PM, Don Wilhelm wrote:
Dwight,
That is not necessary when removing the front panel assembly.
It *is* necessary if you separate
: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
Wilhelm
Sent: Thursday, March 16, 2017 8:09 AM
To: Chuck Chandler; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S front panel remove/replace tips?
Chuck,
Removing the front panel is easy. It is separating the front panel and
5:26 PM
Subject: Re: [Elecraft] K3S front panel remove/replace tips?
There is a manual on the Elecraft web site with an illustrate procedure for
R/R the DSP board, including removing and replacing the Front Panel
Assembly, of course. It is here
http://www.elecraft.com/K3/mods/K3_Remove_Replace
17 14:01
>To: elecraft@mailman.qth.net
>Subject: [Elecraft] K3S front panel remove/replace tips?
>
>I will be putting my K3S on the bench this weekend to try to trace an
>intermittent bug. Elecraft support has suggested removing the front
panel
>and checking the seating of the multi-pin c
9 matches
Mail list logo