I normally wear a headset but when working I like to listen to code to help
build my proficiency and am hearing a lot of distortion/buzz/whine. I
typically am on 40M running about 500Hz wide (my filter is the 8 pole
400Hz), NR is ON, APF is ON. I've tried changing the tone from 700Hz to down
around
Jerry,
I have this buzzing in my K3, and have heard it in some (not all) of the
K3s I have built for friends. I have found that most of it comes from
vibration between the case top and the vertical metal pieces that contact
the top. If that's what you're hearing, you can minimize it by putting som
Outstanding!! I’ll try that. I don’t listen to my rig often over the speaker as
I have some different hearing losses in each ear.
Jerry,
I have this buzzing in my K3, and have heard it in some (not all) of the K3s I
have built for friends. I have found that most of it comes from vibration
be
al Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
ae...@carolinaheli.com
Sent: Thursday, October 22, 2015 8:56 AM
To: 'Randy Moore'; ae...@carolinaheli.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S speaker vibration/whine
Outstanding!! I’
Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ron D'Eau
Claire
Sent: Thursday, October 22, 2015 12:43 PM
To: 'Randy Moore'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S speaker vibration/whine
Are all the top screws in place, including the chassis stiffener
If you do this, be sure to leave some bare metal around the screws so
there can be good electrical contact for shielding purposes.
73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/
On 22 Oct 2015 18:56, ae...@carolinaheli.com wrote:
Outstanding!! I’ll try that. I don’t listen to
I use a 60 degree deflector made from 3" ABS plastic pipe that sits over the
stock top mounted speaker. This gives a noticeable boost to the
sidetonefrequency I prefer, 540Hz. I get nice room filling volume at low
settings of the AF gain pot directed toward ear level. So far this has
outp
Hi Jerry,
You should also try with APF off. APF on the K3 is useful for pulling out
weak signals. I don't see the benefit for general listening.
Just as a further clarification. Generally, if your bandwidth is dialed in
as 500Hz then your 400Hz filter has been switched out and your current
roofi
7;Randy Moore'
Cc: elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3S speaker vibration/whine
Yes, I found something about if the speaker frame gets warped it can affect the
speaker cone. Maybe I over-tightened the speaker and have it warped. I'll take
the cover off, remove the spea
and
Patriotic.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ron D'Eau
Claire
Sent: Thursday, October 22, 2015 12:43 PM
To: 'Randy Moore'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S speaker vibration/whine Are all th
riginal Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike
K2MK
Sent: Thursday, October 22, 2015 3:06 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S speaker vibration/whine
Hi Jerry,
You should also try with APF off. APF on the K3 is useful for pulling o
om
> Sent: Thursday, October 22, 2015 8:56 AM
> To: 'Randy Moore'; ae...@carolinaheli.com
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3S speaker vibration/whine
>
> Outstanding!! I’ll try that. I don’t listen to my rig often over the
> speaker as I have so
And upset the shielding.
On 10/22/2015 8:07 AM, Randy Moore wrote:
...you can minimize it by putting some
vinyl tape over the tops of the metal pieces.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
He
The tape goes between the screws.
Randy
On Oct 22, 2015 3:31 PM, "Wes (N7WS)" wrote:
> And upset the shielding.
>
> On 10/22/2015 8:07 AM, Randy Moore wrote:
>
>> ...you can minimize it by putting some
>> vinyl tape over the tops of the metal pieces.
>>
>
> __
..@cobi.biz ]
> Sent: Thursday, October 22, 2015 3:24 PM
> To: ae...@carolinaheli.com ; 'Randy Moore'
> Cc: elecraft@mailman.qth.net
> Subject: RE: [Elecraft] K3S speaker vibration/whine
>
> That was my experience too, with an older K2 that uses the same speaker.
> The mag
15 matches
Mail list logo