:-( Sad to learn.
73,
Bill
K9YEQ
https://wrj-tech.com/
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Jim AC0E
Sent: Monday, October 1, 2018 7:58 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3_EZ by Bill Coleman, N2BC, SK
Mr. Coleman is indeed
e on a web
site and/or downloadable? There is always something to learn.
Thanks and 73
GianI7SWX
| | Mail priva di virus. www.avast.com |
--
Message: 8
Date: Sun, 30 Sep 2018 16:37:47 -0400
From: "Dick Dickinson"
To:
Subject: [Elecraft] K3_EZ Install
Sorry, I meant TX EQ.
Jim N7US
-Original Message-
I noticed some bugs with that version of K3_EZ. I think they were in saving
TQ EQ settings, but I don't remember for sure. The 2005 or 2007 versions
didn't have those bugs.
I believe the developer is a SK.
Jim N7US
I noticed some bugs with that version of K3_EZ. I think they were in saving TQ
EQ settings, but I don't remember for sure. The 2005 or 2007 versions didn't
have those bugs.
I believe the developer is a SK.
Jim N7US
-Original Message-
I will submit that if this is required by ANY
I will submit that if this is required by ANY software, that it isn't
packaged correctly. An elevated installer should be used and installing
as admin is generally a really bad idea. There are a few exceptions
only. Install normally, K3_EZ will install correctly.
Rick nhc
On 9/30/2018
Thanks, Don and Harlan,
It seems that running the setup routine as Administrator did the trick.
73,
Dick - KA5KKT
You may have to right-click the .exe file and run as administrator
Sent from my iPhone
> On Sep 30, 2018, at 5:04 PM, Don Wilhelm
wrote:
>
> Dick,
>
> I
You may have to right-click the .exe file and run as administrator
Sent from my iPhone
> On Sep 30, 2018, at 5:04 PM, Don Wilhelm wrote:
>
> Dick,
>
> I would recommend you unzip it to a new folder and then run the setup.exe.
>
> 73,
> Don W3FPR
>
>> On 9/30/2018 4:37 PM, Dick Dickinson
Dick,
I would recommend you unzip it to a new folder and then run the setup.exe.
73,
Don W3FPR
On 9/30/2018 4:37 PM, Dick Dickinson wrote:
I'm on a recent Windows 10 fresh build. I'm not quite comprehending the
installation process for K3_EZ V8.
I have a zipped file which contains an a
I'm on a recent Windows 10 fresh build. I'm not quite comprehending the
installation process for K3_EZ V8.
I have a zipped file which contains an a setup.exe, K3_EZ.application and a
folder of Application Files. Further inside the Application Files folder is
another, K3_EZ_2_0_0_7 folder
H have been using this software for quite a while.
I recently tried to open it and got an error message.
I'm sure this has been answered before, but since I can't seem to find any
info on it, can anyone give me the latest?
Is it still around? Maybe there's a better version?
Tnx and 73
KB6G
I need help installing K3_EZ. The zipped file I have is titled K3_EZ2007 and
is 6, 618KB in size. I can't remember if I renamed the file to mark a 2007
version or not.
My problem is with the ClickOnce Application Deployment Manifest, which for
me should be renamed ...Applicaiton Denial
You can find a copy of V2005 at: http://www.w2blc.net/K3_EZ_V2005.zip
Perhaps that will help you.
Bill W2BLC K-Line
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Subject: [Elecraft] K3_EZ software
Does anybody know where to find the K3_EZ software for downloading? It used
to be in the K3 software page but not anymore I think…
Ramón Tristani
r.trist...@gmail.com
__
Elecraft mailing list
Home
Does anybody know where to find the K3_EZ software for downloading? It used to
be in the K3 software page but not anymore I think…
Ramón Tristani
r.trist...@gmail.com
__
Elecraft mailing list
Home:
http://www.na6m.com/EZ-K3/
-Original Message-
From: Ramon Tristani r.trist...@gmail.com
To: elecraft@mailman.qth.net
Date: Fri, 12 Apr 2013 18:11:05 -0400
Subject: [Elecraft] K3_EZ software
Does anybody know where to find the K3_EZ software for downloading? It used
to be in the K3
Hi Elecrafters,
Does anyone know if the K3_EZ firmware program
is currently available for download from any
alternate website since the author has
discontinued supporting it?
I have a friend who is a new K3 owner and I would
like him to be able to try it, especially for its
EQ management.
I've several ZIPped versions; if someone has a site to host 'em, I'll send
'em.
Pls don't ask for individual copies. The emsp bandwidth problem, you know,
thanks.
Brgds,
Dave, N3HE
--
View this message in context:
My sincere thanks to all who responded with the
mirror site and copies of zipped K3 EZ for my to
forward to my friend.
Great appreciated!
Thank you and 73 de N1LQ-Dave
__
Elecraft mailing list
Home:
73, Jim N7US
From: Mark Stennett [mailto:m...@stennett.com]
Sent: November 26, 2012 03:40
To: Adrian; Jim McDonald
Cc: elecraft
Subject: Re: [Elecraft] K3 EZ Program
Mirrored here:
http://www.na6m.com/EZ-K3/K3_EZ_V2005.zip
http://www.na6m.com/EZ-K3/K3_EZ2007.zip
73, Jim N7US
From: Mark Stennett [mailto:m...@stennett.com]
Sent: November 26, 2012 03:40
To: Adrian; Jim McDonald
Cc: elecraft
Subject: Re: [Elecraft] K3 EZ Program
Mirrored here:
http://www.na6m.com/EZ-K3/K3_EZ_V2005.zip
http://www.na6m.com/EZ-K3/K3_EZ2007.zip
Does anyone have knowledge of any software savvy folks showing interest in
picking up K3_EZ? It's a great utility and would be a shame to see it fade
after N2BC did such a great job. I think anyone who has used it would pay for
an upgrade just to keep it supported for future generations of
I'm just an appliance operator that hates to see a good program fall into
neglect.
On Jan 4, 2013, at 5:59 PM, Ken Nicely k...@nicelyweb.com wrote:
What language is it in and is it built on the .net framework?
Ken (KC) Nicely KE3C
On Fri, Jan 4, 2013 at 5:13 PM, Jack Berry
I too went back to the older version. I was having loading problems and
system (win7-64) errors when starting it. Contacted N2BC and he had me
download a newer version - it loaded OK, but caused other problems with
the system.
Uninstalled it completely and installed the old version and all is
Anyone had any issues installing and getting K3_EZ 2.0.0.8 to run correctly
on Windows 7 Professional 64 bit???
I ran this program K3_EZ on Windows Home 32 without any issues for a few
years. (except the brief time 2.0.0.7 was available)
It installs on my machine but after connected may close on
...@mailman.qth.net] On Behalf Of Jim
Sent: Sunday, June 03, 2012 10:03 AM
To: elecraft...@yahoogroups.com
Cc: Elecraft@mailman.qth.net
Subject: [Elecraft] K3_EZ 2.0.0.8
Anyone had any issues installing and getting K3_EZ 2.0.0.8 to run correctly
on Windows 7 Professional 64 bit???
I ran this program K3_EZ
I'm running Win7 Home-64 bit and both K3_EZ 2.0.0.8 and the previous
version have run fine but fail to disconnect when requested. I have had
to 'Ctrl-Alt-Del' to stop K3_EZ each time.
Dave, W8OV
On 6/3/2012 9:03 AM, Jim wrote:
Anyone had any issues installing and getting K3_EZ 2.0.0.8 to
Thanks for the suggestion of going back to 2.0.0.5. See there are a few with
the same issues. Stable and the TX/RX EQ works fine. Only little blip
doesn't recognize the higher AGC settings (THR) in the current 4.51 Beta.
Will stay with 2.0.0.5 for now.
Tnxs again de KE4WY Jim
-Original
...@mailman.qth.net] On Behalf Of Dave, W8OV
Sent: Sunday, June 03, 2012 12:29 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3_EZ 2.0.0.8
I'm running Win7 Home-64 bit and both K3_EZ 2.0.0.8 and the previous version
have run fine but fail to disconnect when requested. I have had to
'Ctrl-Alt
Will the K3_EZ software work with the KX3?
I'm interested in using the SWR Scan feature.
Thanks,
OK, back in my hole,
Ron, KU7Y
SOWP 5545M
Arizona Outlaws Contest Club
Brenda, AZ (Winter)
Caldwell, ID (Summer)
k...@qsl.net
http://www.hatpinsandmore.com
KX3 #0062
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of KU7Y
Sent: Wednesday, May 23, 2012 10:51 AM
To: Elecraft Reflector
Subject: [Elecraft] K3_EZ software Question
Will the K3_EZ software work with the KX3?
I'm interested in using the SWR Scan feature.
Thanks,
OK, back in my hole,
Ron, KU7Y
SOWP
One issue with K3_EZ I find is that when program started, the equalizer
saved settings dont load to the selection until I save the current as
x etc, and then I can scroll through the now loaded selection, and
delete the uneeded x setting later. Hopefully the author is on the list
here. Using a
K3_EZ V2.0.0.2 has been uploaded here: http://home.roadrunner.com/~n2bc/
New features include:
* Up to 6 user defined AGC setups, loaded to the K3 with a single click
- optionally link setups to mode they are automatically loaded on
mode change
* User defined band edges (for MARS or non-US
I have just upload a major update to K3_EZ.
The Frequency Stack panel now includes mouse click access to most of the
K3 Front Panel controls. The program runs significantly faster, a new
Command Utility function, and other goodies.
Find it here:
http://home.roadrunner.com/~n2bc/
Follow
Hi,
Recently I have been trialing K3_EZ software from Bill N2BC.
Its features include: Band stack Registers, Frequency Memories, an
Equalizer Manager and a Configuration Helper.
Great software, well worth a look..
73
Stewart G3RXQ
___
Elecraft
34 matches
Mail list logo