Hello to the group.
I am receiving no problem at all. I am however having difficulty in getting
WSJT-X to transmit. I am using a K3s.
I have the K3s set up for Data A (USB) mode operation and have the MAIN:MIC Sel
set to LINE IN.
On the WSJT software Settings under the tab I have selected
The first thing to check is that you are actually feeding audio into the
K3 MIC socket.
Assuming that's OK, you also need to make sure whatever tone the WSJT
software is generating is *below* the cut-off frequency of the K3's
baseband audio filter.
I've found on my KX2 that under certain set
Hi Serge,
The problem is in the audio path, since CAT and PTT are evidently working.
Starting from the software - make sure the correct sound card output is
selected. In view of the fact that you are able to receive and therefore
must have been able to select the correct sound card input, this is
I use VOX for all digital modes. DATA A for all digital modes except
RTTY, where I use AFSK. Works great. As Dick notes, you may have to
adjust VOX Gain to get the rig to go into transmit, just like any other
VOX operation. And, as with all digital operation, it's critical to not
overdrive the
What are the settings on the "Audio" tab?
Mine are Input: Microphone xxx USB Audio CODEC
Output: Speakers xxx USB Audio CODEC
Wes N7WS
On 8/11/2017 7:30 AM, Serge Bertuzzo wrote:
Hello to the group.
I am receiving no problem at all. I am however having difficulty in get
5 matches
Mail list logo
