All equipment factory built/aligned K3s to KPA500 using KAT500. Had the setup about 6 months now. When first tuned up on any band SSB or CW mode, with 5 watts K3 drive, it takes a short transmission at 15 watts K3 drive for the amp to ramp up to 500 watts as read on the KPA500. It stays at that level until a frequency or band change occurs. A short transmission and it ramps up to full output power again. A CW ID is usually sufficient to ramp the power up to 500 watts.
Is there a tweak that needs to be done, or should I leave well enough alone? Leroy AB7CE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com