I have just completed the assembly of a KAT1 internal auto tuner for my K1. Everything seems fine so far but I must say I am somewhat unclear how to properly adjust R2. The manual gives no instructions on the proper setting of R2 other than on page 10 , about 2/3's way down on the page it says Adjust R2's rotation to match that of R1 (visually)
Am I missing something here? Or do I simply turn the R2 pot to visually appear to be set at the same degrees of rotation as R1 after I have completed the Power Calibration procedure at 5 watts by adjusting R1 There is surely more to adjusting R2 than visually setting it to match R1 (with no power applied)? Help! 73, Don WA9TGT / Donnie Garrett / Muncie, IN ARCI #6447, ARS #1717, AmQRP, ECI-QRP #001 K2 #4003, K2 #3186, K1 #1806, K1 #0416, SW-30+, DSW II - 40 LDG Z-11 Auto Tuner, 102' CF Zepp fed with 300 Ohm Line _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com