I'm building the KPA100. So far, so good. As I peek ahead in the manual I see that I need some "test equipment" I don't have; - 2 Power supplies - Separate receiver How mandatory are these? With the 2 power supplies, can I use two power cables hooked to my singe 20 amp supply? When the test calls for turning one one while the other is off, I'll just disconnect the appropriate + cable. Does that do it? And do I need to monitor the TX signal on a separate RX or can I get away with just assuming all is OK and doing on the air checks with other hams to see if there is an issue? I've already aligned the TX filters in the KSB2 (using a 2nd rig that I've since sold) so that part is covered. - Keith N1AS - - K2 5411.ssb - _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com