Re: [Elecraft] KPA1500 and K2

Is your K2 one with a PA Key out? If so, just an RCA cable and a coax jumper. Tim On Wed, Jan 11, 2023 at 4:03 PM Karin Johnson wrote: > Hello Group: > > Can I use a Elecraft KPA1500 with a Elecraft K2??? > > What accessory cable will I require > > > > Karin Anne Johnson K3UU > > Palm Har

Re: [Elecraft] KPA1500 and K2

Beware of VGA cables and the K2, most [maybe all] are not straight-through. The connector on the K2 has 2 pins approximating RS-232 signal levels and 1 ground.  The remainder are internal signals at internal voltages. Running solid state amps at seriously reduced drive levels can reduce their

Re: [Elecraft] KPA1500 and K2

You can do it with just an RCA cable if you have the keying mod on a K2/10, or a K2/100. N6TV can make you a Serial box that gives you band info, too, if you have the K2 serial interface, but I could hear the KPA1500 polling the K2--I don't think that was a problem with the Serial Box, but I never

[Elecraft] KPA1500 and K2

Hello Group: Can I use a Elecraft KPA1500 with a Elecraft K2??? What accessory cable will I require Karin Anne Johnson K3UU Palm Harbor, Florida __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft H