If it is intermittent, then check for the KPA3A not being seated all the
way down (pull Fan panel, 4 screws and inspect).
Or it could be the relay on the KPAIO3A riser board. To confirm; click
above and below 12W a bunch of times, if occasionally the RX comes and
goes, it is that relay.
Componen
I know this doesn't have the non-gold pin problem but I would remove and replace
the KPAIO3A and KPA just to scrub the pins and to make sure everything is seated
properly.
Wes N7WS
On 2/3/2020 3:34 PM, Carl Yaffey wrote:
When I get my K4 (hopefully May . . .), I currently plan to send in my
Carl,
Unless you are OK with operating at the 11 watt level and below, I would
ask for an RSA and send in the K3S as soon as you get it. Turn around
times on repairs are typically 2 to 3 weeks depending on the backlog.
The K4 is not likely to ship until late April or early May, and I don't
When I get my K4 (hopefully May . . .), I currently plan to send in my K3S for
repair. I have already talked with support.
The symptoms are:
1) In transmit mode, no power when raising the power above 11 watts. This
happens about 90% of the time. So the 100w amp is not totally gone.
2) In receive
4 matches
Mail list logo