Hi,
yes guys, it is exactly that "LPF T/R Switch Rework" mod...
Official and approved document is: Elecraft modification manual for LPF T/R
Switch Rework Rev. E
The necessary parts are achievable at DigiKey, Mouser etc. (see my article
on blog)
The ordering number if you want to ask for the kit
: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA500 Mod Kit?
Sorry I missed it, but what is this mod for? Is it Elecraft approved?
Thanks & 73 de W5SV - Dave
> On Jul 10, 2018, at 06:02, Petr, OK1RP/M0SIS wrote:
>
> Hi,
>
> upon some emails regarding this modification p
Sorry I missed it, but what is this mod for? Is it Elecraft approved?
Thanks & 73 de W5SV - Dave
> On Jul 10, 2018, at 06:02, Petr, OK1RP/M0SIS wrote:
>
> Hi,
>
> upon some emails regarding this modification procedure steps I am sharing
> this note also over here on the reflector. (I am
Hi,
upon some emails regarding this modification procedure steps I am sharing
this note also over here on the reflector. (I am sorry if its bothering for
someone...)
I am recommending after several mods done - when Q5 is removed > do not
install new BU931T back to its place for now. Go to
Randy,
also there I am sending the ordering number if you want to ask for kit at
Elecraft directly...
E850607
73 - Petr, OK1RP
-
http://ok1rp.blogspot.com
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing
Hi Randy,
look there on my blog for more info regarding the KPA500 modification.
http://ok1rp.blogspot.com/2017/02/elecraft-kpa500-lpf-tr-switch-rework.html
You do not need in fact the kit from Elecraft as you can buy the parts,
following
my article mentioned above, by yourself.
Drop me an
The first thing I would have done if I would not have seen it on the page
at Elecraft, is to call the technical staff. I am glad to say we have a
great team that supports their entire line if we have a problem or
question. That includes Eric and Wayne as I've yet to see any other CEO of
any other
I had a chance for a nice visit with David Shoaf at the Elecraft booth
at Ham-Com this weekend. In the course of the conversation, he mentioned
the availability of a mod kit to change out Q5 on the LPF board to
prevent PIN diode failure in the T/R switch. He highly recommended that
this mod be
8 matches
Mail list logo