Byron is on the right track here. The best way to control the KRC2’s ACx pins
is to do it through the K3’s menu. The KRC2 is listening to the K3 to get band
and status information, and not necessarily to a computer. So setting the state
in the K3 will cause it to be changed in the KRC2.
Take a
A bit more on this. Sending MN049; to the K3 puts the K3 into the Menu mode
with the KRC2 item selected. The VFOA display will show the status of the KRC2
ACC pins, read directly from the KRC2. You can then issue UP; or DN; commands
to change the KRC2 ACx pin setting. It will advance (or
Hi,
See the KRC2 manual and search for AC1. On Page 15 of the rev.C
manual, the KRC2 test procedure includes using F4 for accessory
drivers, and page 19 has the default behavior of F4.
I am not in front of my ham pc right now, but I believe there is a way
to trigger those from the utility.
I have research this idea on my own and do not see a way to do what I
want. I know there are really smart folks on this list so I am looking
for some help.
I was hoping to control the 12vdc (ON/OFF) for my RX ant preamp via the
K3 keyboard commands (Writelog, N1MM). I was thinking this
4 matches
Mail list logo