Hi everyone!
I recently bought a used K2 with the KSB2 SSB adapter. The builder did a very
clean, professional building job on both the radio and the KSB2 and I can find
nothing wrong with the construction - i.e. no cold solder joints, no shorts, no
solder bridges, all circuit paths are as they
Don, it was a short betwen either RFC1 or RFC2 and one of the crystal
cases that caused the problem.
Really embarassing because it was basically the first and only real
problem I have come upon building my K2 #5810 and all the extras... :-)
It's so easy to happen that I really think it should
Haken,
At this point, do not be concerned about those voltages you found did not
agree with the chart in the manual.
The no voltages at the diodes is a cause for concern. The problem may be in
where you measured for voltage or the settings you were using. We will get
to that.
Let's verify that
I have just put together the KSB2 SSB ADAPTER and I have problems.
Referring to the manual on page 15 “Initial Test” the last paragraph
“Verify that the K2 performs...” I do not get any sound in the
loudspeaker, or the sound I get is very very muted. I can hear some very
faint - both CW and SS
4 matches
Mail list logo
