Clark,
I was not aware that there were 2 revisions of the KXB30 board. I have
dealt with a number of KX1s with the KXB30 installed, and have found no
difference in performance.
I am a bit puzzled by your subject line. There is no relationship to
firmware with the KXB30 board, either 1.01 o
I have two of these boards: Rev. B and Rev B1. I can't see what the
difference is but assume the B1, being newer, must have fixed something.
The Rev B board is actually cleaner and better built. What would be the
downside of using the B? I guess I could try it and see...
72, Clark WU4B
--
V
: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX1 Firmware for KXB30
Clark,
The 1.02 Firmware will handle the KXB30 as well as the KXB3080. BTW,
Elecraft does not sell back levels of firmware. They are all 'backlevel
compatible'.
I trust you have the KXB30 option in hand - it is no longer
Clark,
The 1.02 Firmware will handle the KXB30 as well as the KXB3080. BTW,
Elecraft does not sell back levels of firmware. They are all 'backlevel
compatible'.
I trust you have the KXB30 option in hand - it is no longer available
from Elecraft.
73,
Don W3FPR
On 4/23/2013 5:06 PM, Clark
I have a KX1 S/N 2528 with 1.02 MCU firmware and would like to install the
KXB30. Will the 1.02 firmware work or do I need to replace it with 1.01.
Same question (different rev. #'s) for ATU.
I've searched the Nabble reflector and haven't found the answer. Thanks
for the bandwidth.
--
72,
C
5 matches
Mail list logo
