Thanks ever so much for the response Don.
Bill KJ6BVV
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Thursday, June 17, 2010 10:17 AM
To: Schindele, William
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX1 LED Display Issue
No worries about that.
Ease
No worries about that.
Ease your mind, that is normal, but only seen when the ambient light is
VERY low.
73,
Don W3FPR
Schindele, William wrote:
> On a new build KX1 last night I noticed that when the LED went off as
> designed, there was a faint outline of "88" in the first two digits. I
> had
On a new build KX1 last night I noticed that when the LED went off as
designed, there was a faint outline of "88" in the first two digits. I
had not noticed this prior, but it was the first time I had used the KX1
in a very dark environment. I could set the LED to three levels as
designed, the shut
Jason,
Not to worry - it has always been that way, and all of them will do that
too.
The uP lines that drive the LED display are shared with other functions,
and even after the LED is 'blanked', these other functions will still be
active and the LED segments will have a bit of a 'glow' to them
Hey guys,
Quick question... I noticed that after the LED goes out after displaying
the frequency, some of the segments are still lit, but very faint. It
does not affect the radio in any way, but I was just curious to why this
happens.
Thanks
Jason N8XE
__
Hello All,
Working on installing the 30/80 board in this newly assembled KX1 and just
realized I don't remember how to get the subject parameters adjusted.
Did it early on in the assembly process! Page 65 at the top says to tap Band
and RIT. Together, they just go thru the battery/s-meter opti
Al,
Not a lot you can do other than to devise some sort of shade to keep the
direct sunlight off the LED. If it is not a frequent requirement,
shading it with your palm long enough to see the frequency may be enough.
Of course working in the shade is always more comfortable - at least at
my
My display is almost impossible to see outdoors. Can I do anything to make the
digits more visible outdoors during the day?
al ve3gam
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscri
I am experiencing a static like noise level when the LED is lit. The noise is
significant enough to cover up any weak signal. I almost have to tune, wait
for it to time out and see if anyone is there. It doesn't occur on all
frequencies, it is random. Sometimes on 80M, I have noise when the L
9 matches
Mail list logo
