Hi Michael,
Glad it fixed it Michalel!
73,Reed W4JZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Hi Reed,
Thanks for the hint with the Automated Transmit Gain Calibration. This
solved my issue as well!
73, Michael DG3NAB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi Peter,
I was using a different laptop with a its own mail app & for some reason the
text didn't show up. I just sent Michael an email with the info he needed to
get his KX2 to work on 10 meters.
For those that have this problem with their KX2 not transmitting full output on
10 meters just
Dear Reed,
Send mail to this reflector as "Text only" or both text and HTML for all
HTML markup text is skipped by this qth.net mailing list.
Your mails are received as completely blank by all of us as shown below
my message.
Best 73, Peter - PA0PJE
Op 29-04-2022 om 01:12 schreef Reed
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Elecraft KX2:
If I set the transmit power to 10W on the 10m band, it seems that the
output power is 0W if I try to send. At least the RF power display does not
display anything. Same with 9.8W. If I set the value to 9.6W (or lower)
then everything is back to normal. This does only happen on 10m,
6 matches
Mail list logo
