Good idea, Mike. Added to the future changes list.
Wayne
N6KR
> On Feb 10, 2018, at 9:38 AM, Mike Penzo wrote:
>
> While in CW mode, I typically listen with the filter wide open (2.8khz). Once
> I find a signal, I narrow the filter down (400hz) by tapping the AF knob
> after tapping the FIL b
While in CW mode, I typically listen with the filter wide open (2.8khz). Once I
find a signal, I narrow the filter down (400hz) by tapping the AF knob after
tapping the FIL button.
Opening up the filter (back to search mode) requires lots of cranking on the AF
knob (back to 2.8khz) after tappi
@mailman.qth.net
Subject: Re: [Elecraft] Elecraft] KX2 Firmware
I missed the FW release, I was busy sharpening my sword and degreasing my
chain mail.
Fred K6DGW
Sparks NV
Chris Tate - N6WM wrote:
>That's a busted exchange copy.. ;-).
>
>-Original Message-
>From: Elecraft
>kev...@coho.net
>Sent: Tuesday, May 23, 2017 5:43 PM
>To: elecraft@mailman.qth.net
>Subject: Re: [Elecraft] KX2 Firmware
>
>I must be getting old. I really don't remember what I was doing in the 11th
>century.
>
>73,
>
> Kevin. KD5ONS
>
>
That's a busted exchange copy.. ;-).
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
kev...@coho.net
Sent: Tuesday, May 23, 2017 5:43 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX2 Firmware
I must be getting old. I really
Tom Francis, W1TEF writes:
I was just looking at the KX2 firmware, Beta and 2.69 and discovered
that they were built and released in the 11th Century!! Who knew?!?
**MCU 2.69 / DSP 1.49, Final Release Feb 5, 1017**
**MCU 2.75 / DSP 1.49, April 7, 1017
Dang ... that means the warranty is pro
I must be getting old. I really don't remember what I was doing in the
11th century.
73,
Kevin. KD5ONS
On 5/23/2017 5:38 PM, Tom Francis, W1TEF wrote:
Greetings,
I was just looking at the KX2 firmware, Beta and 2.69 and discovered
that they were built
and released in the 11th
Greetings,
I was just looking at the KX2 firmware, Beta and 2.69 and discovered
that they were built
and released in the 11th Century!! Who knew?!?
**MCU 2.69 / DSP 1.49, Final Release Feb 5, 1017**
**MCU 2.75 / DSP 1.49, April 7, 1017
**Best regards,
Tom, W1TEF
Lexington, SC
**
**
__
I'll have new field-test KX2 firmware shortly that allows adjustment of all mic
and VOX menu entries in any mode and whether or not a mic is plugged in.
73,
Wayne
N6KR
On Jun 15, 2016, at 4:18 PM, Luke via Elecraft wrote:
> Let's try this again! For whatever reason my gmail app on my Android
Luke,
I've found that if I have an audio cable plugged in and connected to a
computer, the KX2 thinks there's a mic load and will let you change those
settings... provided you are in SSB.
If in DATA mode it will tell you N/A I seem to recall. So just change modes
to SSB, change the MIC settings i
Let's try this again! For whatever reason my gmail app on my Android must be
formatting something incorrectly.
Thanks to all the Elecraft folks for this fantastic little radio. I'm really
enjoying mine!
I do have a couple of potential firmware suggestions:
It would be great if the VOX and MIC BTN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
12 matches
Mail list logo