) / ON7YK
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Igor Sokolov
Sent: vrijdag 2 maart 2018 4:03
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 ACC1 to PC and expert 1.3K-fa ?
I have the same setup
is not like K3
73’ André on7yk
From: Graziano Roccon [mailto:graziano.roc...@gmail.com] On Behalf Of Graziano
Roccon IW2NOY
Sent: donderdag 1 maart 2018 11:08
To: Andre Bourbon
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 ACC1 to PC and expert 1.3K-fa ?
Hi,
Serial communications
Roccon [mailto:graziano.roc...@gmail.com] On Behalf Of Graziano
Roccon IW2NOY
Sent: donderdag 1 maart 2018 11:08
To: Andre Bourbon
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KX3 ACC1 to PC and expert 1.3K-fa ?
Hi,
Serial communications is thinked for two buddies with crossed tx
Hi,
Serial communications is thinked for two buddies with crossed tx and rx., not
for three.
You have too many tx on the same cable.
Remove the tx from the db15 of expert you don't need it. For the expert is
enough READ (rx) the frequency that set the CAT coming from the PC (TX).
Remove the
My setup is : KX3 --- PC Expert Ampli 1K-fa or 1.3k-fa
Using the ACC1 port :
Kx3 Connect to my pc with KXUSB cable and DX-lab logging prg - band
changing is ok
KX3 connect with my Expert ampli DB15 ( txd,rxd,gnd ) ( flex radio cat
settings ) -band changing is ok
I will
5 matches
Mail list logo