Hi Don and All,
Just to keep you updated about my KX3 problem. Now I put a piece of plastic
separating the two side of the box. It was an advice from a friend and a KX3
user.
Anyway, now the behavior of the radio is exactly the same as three months
ago when I bought it.
I can hear the relays
Hi,
I have had a similar problem with my KX3 after installing the KXBC3
Internal NiMH Charger / Real-Time Clock.
I guess I made a mistake when I closed the KX3 cover and I damaged the Flex
Cable (E980219).
The KX3 is working fine in the most of the time, however, intermittently I
get the messages
Ricardo,
With a damaged flex cable, whatever error messages you receive are
probably due to the damaged cable.
Wait until you have the replacement cable before concluding that other
problem may exist.
73,
Don W3FPR
On 2/4/2014 6:43 PM, pu2clr wrote:
Hi,
I have had a similar problem with my
Hi Don,
I am afraid you are right.
If so, I have no idea how to repair it.
Replacing the RF Board or CP will be a bit complicated from Brazil.
I have tested the demaged cabe with a multimeter and apparently there is no
reason for this symptom.
I mean, despite the appearance of the cable, it
Ricardo,
If the new flex cable does not fix the errors, contact
supp...@elecraft.com for further assistance.
73,
Don W3FPR
On 2/4/2014 9:30 PM, pu2clr wrote:
Hi Don,
I am afraid you are right.
If so, I have no idea how to repair it.
Replacing the RF Board or CP will be a bit complicated
I found the problem myself. I really should keep quiet but on the chance
that someone else makes the same error I'll admit to my ineptness.
I opened up the KX3 and looked very carefully around the inside.
Something about the ribbon cable joining the two halves caught my eye.
It was plugged
I completed the assembly of my new KX3 yesterday. When turning on the
KX3 I get an immediate ERR IOA d=001. If I tap the Disp/Menu button it
changes to ERR IOB d=001. I have checked the cable between the Control
Panel board and the RF Board several times. A third tap of the Disp/menu
button
: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Campbell
Sent: Wednesday, November 21, 2012 8:51 AM
To: elecraft@Elecraft List
Subject: [Elecraft] KX3 ERR IOA IOB
I completed the assembly of my new KX3 yesterday. When turning on the
KX3 I get an immediate ERR
8 matches
Mail list logo