While operating the NAQP SSB last night using my KX3 and properly configured for KX3 operation, I noticed an "error" message of sorts. It appeared at the bottom of the Entry Window and said, "K3 Sub-Mode PSK-D not supported". This happened only on 20M and didn't affect logging nor operation! The message was conspicuously absent on 15 and 10 (all on USB) and 40 and 75 meters. So today, I decided to check things out. What I find is that if I'm operating 20M SSB and using N1MMLogger, I get the "error" message. Then, if I go into DATA mode, I find that it's set at PSK-D while the "error" message is displayed. If I change the mode to AFSK-A, or any mode other than PSK-D, the "error" message goes away. Now you'd think that while I was in SSB/USB mode, that the PSK-D setting information wouldn't be sent to N1MM... Am I doing something wrong? Bert, N4CW ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
