Robert,
I found that in SOME (but not all) cases, enabling the mode noted below helps:
MCU 1.84 / DSP 1.28, 1-4-2014
* AM BROADCAST BAND (BCB) RECEIVE OPTIMIZATION: If you have a KXAT3 ATU
installed, you can select one of two optimizations for reception below 1300
kHz. While in the ATU MD
John,
The T/R switch PIN diodes are protected against strong AM BC stations by
a high pass filter. You will have better luck if you use the RX ANT
input (assuming you have the KXV3 option as well as the KBPF3 installed).
73,
Don W3FPR
On 8/14/2015 6:47 PM, John Klewer wrote:
Just got
Just got around to measuring RX sensitivity on my KX3 and, boy, does it
drop off severely (about -30 dB) at 1 MHzplaying with the ATU settings
as others have mentioned here doesn't help
John
On Fri, Aug 14, 2015 at 10:30 AM, Mark, KE6BB via Elecraft
elecraft@mailman.qth.net wrote:
Robert,
Do I need to change settings to optimize reception of AM broadcast? ATU
off. what else?
Bob
K7VO off to wilderness. Need to hear Seahawks game tonight.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Leave the ATU in normal mode. The KX3 uses it a filter below 1.8MHz, in order
to block out strong stations.
A long wire antenna is probably a good idea.
wunder
K6WRU
CM87wj
http://observer.wunderwood.org/ (my blog)
On Aug 14, 2015, at 8:58 AM, Robert Sands k7vora...@gmail.com wrote:
Do I
5 matches
Mail list logo
