The PR6 is controlled by either the DIGOUT1 line in the ACC connector,
or with the jumper installed, it is connected with the RX ANT button
(not the PRE button).
So I don't see how you could use either the PRE button or the RX ANT button.
You could use the DIGOUT1 signal to operate a 5 volt rel
I have a 2 meter mast mounted preamp that is fed thus turned on by a bias tee
injecting 12V into the coax, can I control that preamp by switching that 12V
the same way the PR6 is controlled by the pre button on the K3 through the ACC
connector? Thank you.
R Thorpe K6CG
_
2 matches
Mail list logo
