I am thinking of building a low power QRP valve transmitter (e.g. 1 or
perhaps 2 6V6's/6L6's) for use in the G-QRP club valve activation weekends -
output 5 to 10W.
Many of such circuits are using a crystal oscillator, but I plan to build a
Nano digital VFO in place of the crystal to have more fr
Thanks Fred for the suggestion of using a Dow-Key relay, but they seem to be
unavailable in UK/Europe except on Ebay secondhand for $120 or more & those
are mostly 24V rather than 12V.
Are there any alternatives
Ray G3XLG
__
Elecraft m
My thanks for the helpful comments and suggestions received both on the list
and by private Email
Ray G3XLG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mail
I am using the K2 on CW with another XCVR and I need to mute, or vastly
reduce the system gain. Does anyone know of a good scheme to do so? AGC?
Mute function? Thanks, Bob
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subs
There is a Dow-Key coax relay that does that automatically ... a pin
grounds the inactive terminal. I would think your scheme would work OK.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
Ray Spreadbury via Elecraft wrote on 1/19/2023 8:43 AM:
I am thinking of building a low power QR
Ray,
For what it's worth, I've been running a homebrew solid-state QSK CW
transmitter for the past 4 years. My T/R relay is an AXICOM V23105A5303A201. It
is a dual SPDT relay where each SPDT section is tied in parallel for greater
power handling capability. The receiver is connected to the ant
This might be helpful to you.
http://www.ac6rm.net/mailarchive/html/elecraft-list/2003-08/msg00473.html
- Original Message -
From: "RMarch" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, November 09, 2004 9:58 PM
Subject: [Elecraft] Muting the K2
> I am using the K2 on C
Hi, Bob-
I don't know if this applies to your situation, or if it is the best
available scheme really, but I use my K2 for RX when I am operating with my
Johnson Ranger TX. The best way I have found to do this is to key both in
parallel, the K2 in TEST mode so that it mutes RX in synch with m
8 matches
Mail list logo