Don and the members of the list,
I am still troubleshooting the alignment issue. I am better now than I was a
couple of days ago. Don and I have been comparing notes. I have removed the
ATU from the circuit and tried some other things. After some poking around
with the RF probe I have confirmed
John Hoaglun wrote:
>
> I am assuming that LO P is a status that is read from the RF Product
> Detector circuit at the output the of low pass filter rail.
There is only an envelope detector there, but I would have thought, if
you have the KAT2, that it was the forward power from the SWR bridge.
...@hoaglun.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] NG0R - K2 160m alignment problem.
John,
There may be no problem - set the power to something grater than 2 watts.
With the KAT2 installed, the K2 automatically limits the power to 2 watts
for tuning. If your power setting is a
John,
There may be no problem - set the power to something grater than 2
watts. With the KAT2 installed, the K2 automatically limits the power
to 2 watts for tuning. If your power setting is a bit below that, the
LO PWR message may result.
73,
Don W3FPR
John Hoaglun wrote:
> I am having a p
I am having a problem with the 160m alignment.
When I power up the radio I do not get any error messages. If I test the
receive antenna via the menu I can hear the K2 relay open and close as
expected.
When I disable the ATU with the CALP/CALS setting and then try to engage the
radio via the Tune
5 matches
Mail list logo