Problem: I can turn on the KX3, start WSJT X 1.6 and commence decoding and
making QSOs.
However, if I change to a different band, I can't make QSOs on that band or go
back to the original band and make Qs.
Adjusting ALC on the new band works...power out is the same, etc.
Is there some magi
Sent from my Verizon Wireless 4G LTE smartphone
I am receiving info needed to correct this problemtime sync may be off or
intermittent.
I am using Dimension 4...may try something different.
Thanks to all who replied. Jim R. K9JWV
On 12/29/2016 9:17 AM, James Rodenkirch wrote:
>
> Pro
Jim,
JT is no different than any other soundcard data mode. You should be
following the data mode setup instructions in the KX3 manual rather than
the information on the internet which is generic for common transceivers
which control power output differently than the Elecraft gear.
Are you
Hi Jim,
I’ve got the KX3 (and a K3) and had run WSJT-X 1.6.0 for a long time. I
installed 1.7.0 rc1 and now use 1.7.0 rc3. There is no magical stuff required
to change from one band to another. What DOES work when you change to another
band? Are you certain that it is sending RF? The red TX lig
4 matches
Mail list logo