I have just completed building K3 #1397. It includes the KPA3, KXV3, KBPF3 and four filters.
It went together very well and all is working fine so far except the power output. I have done the 50W calibration per band and that produces an output of 50W. However a setting on the power control of 71W gives 100W out and 76W gives an actual 120W out. From there the power controls gives an output of up to and beyond 150W. I have tried recalibrating and I have downloaded the latest but to no avail. I have also emailed Elecraft but given it is the weekend I do not expect to hear from them for a few days. I wonder if anyone else has had this problem and if so how it was cured. Or has anyone any suggestions. I think I might take out and reseat the KPA3 in case it is a bad contact but I don't think it is that. Barry Simpson VK2BJ _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
