I'm a new ham... I just purchased new KPA500 and KAT500 to use with my new
K3S/100... following the wiring diagram of the KAT500 manual, page 5, figure 1,
I also attached two E850463 cables (ordered from Elecraft), but when I try to
transmit into a 1500w dummy load, by following KPA500 manual
Download this Application Note from the Power Combo web site.
http://www.elecraft.com/manual/K31_2017.pdf
Cheers,
David
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Mark:
I have the same configuration. When you transmit into the dummy load,
what mode are you using? If SSB, there is no output until you speak
into the mike with the correct audio settings. TUNE mode is best for
checking to see that all is working.
I suggest you see top of page 66 of
Sent: Friday, October 12, 2018 7:22 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] New KAT500/KPA500 Setup Questions (Mark WU6R)
Download this Application Note from the Power Combo web site.
http://www.elecraft.com/manual/K31_2017.pdf
Cheers,
David
--
Sent f
Shoaf
> Sent: Friday, October 12, 2018 7:22 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] New KAT500/KPA500 Setup Questions (Mark WU6R)
>
> Download this Application Note from the Power Combo web site.
>
> http://www.elecraft.c
5 matches
Mail list logo