Happy Thanksgiving to all!
My Thanksgiving Eve was great when the UPS man walked up and delivered the long
desired KX3. I spent the next few hours putting the kit together and it felt
like it went together without a hitch. I then decided to make my first QSO and
wanted it to be DX so I worked
What are you seeing on the ALC meter? What Mic? Sounds like you have no
audio drive. Check mic settings. Do you hear your audio in the monitor?
--
View this message in context:
http://elecraft.365791.n2.nabble.com/New-KX3-No-SSB-output-tp7610849p7610850.html
Sent from the Elecraft mailing
Keith,
Do you have the mic plug in all the way? Remove it and plug it in again.
Did you turn on bias? The MH3 needs that to be on.
Do you have your mic gain set to a high value? If so, turn it down to a
low level - set compression to zero initially.
Then bring up the mic gain until you see 5
Message -
From: "Bob N3MNT" <b...@hogbytes.com>
To: elecraft@mailman.qth.net
Sent: Thursday, November 26, 2015 9:43:01 AM
Subject: Re: [Elecraft] New KX3 - No SSB output
What are you seeing on the ALC meter? What Mic? Sounds like you have no
audio drive. Check mic settings.
I‘m not sure what you mean by “mic setting” at 3-5. Have you tried setting the
mic gain higher? I keep mine at about 25 for the MH3. Works fine.
Grant NQ5T
K3 #2091, KX3 #8342
> On Nov 26, 2015, at 9:01 AM, kb3...@comcast.net wrote:
>
> Bob and others,
>
> The ALC meter is not moving
Reflector" <elecraft@mailman.qth.net>
Sent: Thursday, November 26, 2015 11:01:09 AM
Subject: Re: [Elecraft] New KX3 - No SSB output
I‘m not sure what you mean by “mic setting” at 3-5. Have you tried setting the
mic gain higher? I keep mine at about 25 for the MH3. Works fine.
Grant NQ5T
K
RE: I have the Mic setting at 4 (manual recommends 3-5).
Page 15 of the manual recommends the MONITOR set to 3-5, not mic gain. It also
says "Mic gain for the Elecraft MH3 us typically 15-25."
I suspect your mic gain if set at 3 to 5 is too low.
MarkKE6BB
com>
To: kb3...@comcast.net, "Bob N3MNT" <b...@hogbytes.com>
Cc: elecraft@mailman.qth.net
Sent: Thursday, November 26, 2015 11:36:36 AM
Subject: Re: [Elecraft] New KX3 - No SSB output
RE: I have the Mic setting at 4 (manual recommends 3-5).
Page 15 of the manual recommends the
8 matches
Mail list logo