Joe,
I bet that was it. Bob, W9BF emailed me
earlier with the same info. I too was able
to decode a W7, think it was W7DX, he was
in there till the end. Maybe he was
working a different contest, he was making
Q's I could copy.
I'm getting to the age where Senior
moments happen but I
I was doing the exact same thing. I was done with my FT8 and wanted to check
things out for this weekend’s contest. I could see lots of RTTY on the P3. So
I tuned some of the stations with MTTY and no decode. I did eventually find
one station that was decoding. It was a W7 station.
That
Don & Wes,
I'm stymied by what caused the problem.
Sometimes using N1MM with MMTTY there is a
bit of software change and PTT-KEY change
but never just running MMTTY alone with
the K3s. When I went to N1MM it was with
AFSK A and it was already in the data mode
as my last 20M Q was with
Make sure the pitch in the K3 matches MMTTY.
On 9/17/2017 12:37 PM, Gary Smith wrote:
Hard to enter a short subject that is
complete...
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Gary,
One thing to check is when you change from WSJTX to MMTTY, does the K3
data mode change to AFSK A in LSB mode? If not, the software is to
blame. The sequence of commands (or lack of commands) sent to the K3
may be part of the problem.
You certainly can use DATA A for RTTY if you
Gary,
What bandwidth are you using in AFSK A. Normally it defaults to 400 to
500 Hz, but your switch from DATA A to AFSK A may be confusing it.
I cannot speak to interaction between WSJTX and MMTTY, but you may find
something there in the switchover.
Normally in MMTTY, you tune to a
Hard to enter a short subject that is
complete...
Have a K3s using USB to the computer & the
internal card for digital modes.
I wanted to work a few Q's in the RTTY
contest and have been using WSJT-X for FT8
contacts.
In the K3s WSJTX requires Data A for FT8
and in MMTTY it requires AFSK
7 matches
Mail list logo
